elephant:

tournedos:

elephant:

Never seen those before.

You should have, they have been a prize draw item not so long ago

well no Prixe Draw complaints from me !

so I wonder if Struer has a gift shop ...

If they sell them, pick me up a pair when you're there!!! (I'll pay you back of course)

I purchased a BS2000 Red for $75 with stand in mint condition. CD mech doesn't work but it also came with a Beo4 and aux cable. Gonna use it for a garage radio I think:)

Hi again!

Guess what! Last week I bought something again and I recieced it today! I have bought a MPAV 9000 for my AV9000!  But I sadly still have to buy a MasterLink cable before I can start using it. I am also going to buy a wall bracket for it as I have planned to mount the MPAV on the wall next to my sofa. I will post a picture when I have finished the installation.

- Dennis

Chris:

What the best way to connect this to our Beovision 7-40 mk3 in an adjacent room? Is their a radio/IR Masterlink or is it yet more cables?

You could buy a pair of beolink Wireless 1's and do it that way. Not cheap though! It is a neater option than running cable if you can't hide it! Cable is more robust, but I have not had problems with the Wireless 1 although others have!

Take a look at my little project - link

Stoobie

Thanks for the warning, kallasr! Can you tell me how I can recognize the right ML cable? If it's recognizable!

- Dennis

LINK might be helpful.

Ralf

tompa:

Hi,

You can use the normal masterlink cable but you have to make a short circuit between pin 4 (ML sense)and 12 on masterlink socket in MP AV9000 stereo

that have bin done in struer from serial number 10822537.

Can anyone confirm, that this will work? Cause then I'm going to make that operation (If the Serial Number is lower than 10822537)! when I'm opening the MPAV 9000 sometime to adjust the doors.

- Dennis

In this thread it is pin 4 and 6....

Wait for the experts...

Ralf

Allmighty BL9

A pair of S120's.

Actual condition is worse than the photo's suggest so some work required here methinks...

Holy crap Chris, that's a challenge!

tompa:

Hi,

You can use the normal masterlink cable but you have to make a short circuit between pin 4 (ML sense)and 12 on masterlink socket in MP AV9000 stereo

that have bin done in struer from serial number 10822537.

 

Ulf:

Nö,

geht auch mit den neueren ML Kabel:
Man muss "nur" im MPAV die ML Buchse PIN 4 mit PIN 6 brücken.

Ulf wünscht frohes Fest

I think this is Ulf's website, and I am very impressed of his Bang & Olufsen section, fantastic work!  It seems that Ulf's knowledge is quite big on this area. Can you confirm if it's either PIN4+6 or PIN4+12 that needs to be connected, Ulf?

- Dennis

have fun with sanding sanding and sanding!  New lacker and foamrings and have a look at the filter and they will be as good as new!  

Dennis (Loudspeaker):

I think this is Ulf's website, and I am very impressed of his Bang & Olufsen section, fantastic work!  It seems that Ulf's knowledge is quite big on this area. Can you confirm if it's either PIN4+6 or PIN4+12 that needs to be connected, Ulf?

He is fantastic, seen and heard many good things about Ulf!

Leslie:

Holy crap Chris, that's a challenge!

Bigger than you could imagine. One of the Bass drivers wasn't working but thanks to a tip from Martin (detached flexible wire to the voice coil which required some pretty painstaking dismantling & resoldering) at least that is now fine.

The usual refoaming will be next followed by a recap.

Then some of the retaining pegs are missing from the frets which I'll need to "re-manufacture" so to speak.

Finally the cabinets - I haven't yet decided on a course of action. They have been allowed to get damp which has caused the bottom joints to swell & part. That's before I even consider any remedial repolishing, but rest assured I'll get there.

Chris.

Chris I could use all retaining pegs for my Beovox M150 covers. All 4 of them in total. They are all broken.

So if you find a solid solution please send a pm. My CDX still works since you did lefthinge some years ago.

I'm glad my Beovox S120 only had rot and my Bevox M150 are scratched but not deep. I do hope you do a thread with clear instructions on the rebuild of yours.

Anyway congratz when finished you are in for a treat.

Medogsfat:

Leslie:

Holy crap Chris, that's a challenge!

 

Bigger than you could imagine. One of the Bass drivers wasn't working but thanks to a tip from Martin (detached flexible wire to the voice coil which required some pretty painstaking dismantling & resoldering) at least that is now fine.

The usual refoaming will be next followed by a recap.

Then some of the retaining pegs are missing from the frets which I'll need to "re-manufacture" so to speak.

Finally the cabinets - I haven't yet decided on a course of action. They have been allowed to get damp which has caused the bottom joints to swell & part. That's before I even consider any remedial repolishing, but rest assured I'll get there.

Chris.

Wish you all the best with restoring and please show me (us) the results will you? I'm also interested how you re-manufacture the pegs!

Medogsfat:

Then some of the retaining pegs are missing from the frets which I'll need to "re-manufacture" so to speak.

I think I once read about somebody making them from plastic wall plugs. Find a suitable size, cut to length and epoxy in. Even available in black if you look around

That's a good idea Will work on that unless somebody else has a better idea!

For repairs to the broken front grill pins, I've seen wooden dovel pegs used instead.
Remains of the old pins removed and ground down, dovel pegs glued to the grills and painted black.
Worked fine.

Martin

Dillen:

For repairs to the broken front grill pins, I've seen wooden dovel pegs used instead.
Remains of the old pins removed and ground down, dovel pegs glued to the grills and painted black.
Worked fine.

Martin

I did something like that with M70s, though I didn't paint the dowel.  I reinforced the joint by "pinning" it.

tournedos:

Medogsfat:

Then some of the retaining pegs are missing from the frets which I'll need to "re-manufacture" so to speak.

I think I once read about somebody making them from plastic wall plugs. Find a suitable size, cut to length and epoxy in. Even available in black if you look around

This is the method I've used before using plasterboard plugs with the expanding ends cut off & shaved slightly, a bit hard to explain without pictures. Done properly there's a method to also screw these onto the post seats to ensure a really good fix. I'll probably post something in the workbench section as this restoration progresses.

Chris.

Just finished mine thanks to you guys!

Hi folks,

I bought some B&O stuffs this last 2 months:

BV10-40 

BS8

BeoTime

Beo6

Orange frames for BS8

PL MK3 + HDMI cables + socks from Steve (SoundsHeavenly)

...and third party stuffs:

Dvico TVIX Slim S1 Duo HD Wifi

Re-Bl X dongle to control my PS3 from Beo6

...and now, think about new Beocom 5 + Beocom 2 to replace my current Beocom 4, and some light dimmers...

Well, my Visa card doesn't stop crying these days....

Cheers,