I am new at this. I inherited such system, disconnected, with cut wires, parts all over the place in a "new" house.SO far I was able to retrace and reconnect everything (almost) and the sound is grreat. 1) I still need a MCL 2A (missing). Anyone knows how I can get one? 2) I still have a pair...

I understand that the Beosystem AV9000 powers the AV9000 Audio Kit via the MasterLink cable, and that it is the only B&O product to do this (the other BeoLink boxes having built-in power supplies). However, the BeoTech minisite just shows a single MasterLink pinout. Would I be correct in thinking...

Great fun reading the forums! Started buying B&O stuff back in the 80ies and by now my house is "well equipped" (my wife would use more profane words).... But, I have really never been able to crack the Link Option logic, given that there is one ;-) Anyway, in this case I have - a BeoSystem3...

Hi everybody, I bought IR eye for my Beolink PC2 recently. It comes as a silver disk with 5 buttons and a 3-core cable with 3.5 jack (and a wiring diagram of cause). The matter is: IR signals come through to Beoplayer OK, but no one IR eye button affects Peoplayer regardless of any Beolink option (0...

I've recently purchased a number of secondhand items, including a BeoPort Active, and matching Eye. In the manual, mounting the eye involves fitting a bracket to the wall, hanging the eye on the bracket, and fitting a small screw to hold it in place. However, the eye which I received came with a...

ok here goes a 'friend' of mine has strayed down the path of wiring several rooms of his house with the intention of putting BOSE in. Having seen what B&O stuff can do he wants B&O in the several rooms he has expensively wired already. Each room has at least a pair of passive speaker...

Hello I have a Beocenter 1 from 2005 (Typ no: 8523, SW:2.5, Acc: ML STB DSS) in one room connected to a Pace twin turner PVR , a VX7000 VHS and with a ML cable to the Beoport (SW: 4.65). I have recently got B&O to connected these products with my Beosound 9000 (SW:2.21) (with a ML cable) and BeoLab...

Hi All I have my MX3500 connected to my MX7000 via the 7-pin Beolink. MX7000 is master and MX3500 slave (link-tv).. Everything works exactely how I expect. If I press a source, that is not locally configured on the MX3500, it will try to link it throgh the Mx7000. If I change the MX3500 to Master mode...

I am new here and not particularly technically up to speed, so please forgive me. I have a beolink PC2 which was installed on my lap top. The lap top got a virus and I lost everything; the B+O shop re-installed the software on my desk top. I found that whilst the software worked, it scanned my hard disk...

I have a similar problem, but I'm missing the V. Tape function on my universal remote, so I can't view anything that's plugged into the SCART plug. Do you know the HEX code for that button?