|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » 5500 ( RSS)
-
hello all, I have just recieved my replacement beomaster 5500 (having had a bad experience with the last 'bargain'), and most functions appear to be operating correctly. however..... the only thing i am getting on the left hand of the display is the word LOCKED this light is fixed (even in standby...
-
Dear all, Sorry for what must be a very basic question. I have a beomaster 5500 that I would like to connect up to my two extra speaker kits. It seems from the MCL2 manual that I have two options: 1. Use one of the four 7 pin Din connections (most sensibly Aux) to connect to the MCL2 2. Wire up two proprietary...
-
Leider habe ich Probleme mit meinem MCP 5500... Das Gerät scheint auf dem ersten Blick zu funktionieren, doch leider verschwinden die Anzeigen nach ein paar Sekunden wieder vom Display und manchmal erscheint auch "No Contact". Das Lautstärkerad reagiert überhaupt nicht. Besteht...
-
Hey Leute, ich bin seit kurzem stolzer Besitzer eines Beomaster 5500 und Beocord 5500. Ersatzteile: Beide sind in einem dem Alter entsprechenden Zustand, aber i.O.. Auf dem Deckel des Beomaster ein paar Kratzer und dem Beocord fehlen ein paar Gummifüße. Wie komme ich an Ersatzteile? Gibt es...
-
Hi this is my first post in this forum and i hope i am posting in the right section, i was given a beosystem 5500 I am an electronics fan and loved the system at first sight, when i tried to connect everything worked except the speakers, i am a computer technician so i opened the unit and found that...
-
Hi, I have a Beosystem 5000 with a pair of redline 60 speakers which I bought back in 1986, it is in perfect working order and condition but has mainly been in storage for the last 10 years give or take a dusting off and test session. I was wondering if there would be anyone who would know where the...
-
Hello everybody I have a 5500 CD. It indicates Radial servo problem in service mode. I wonder if there is any known, typical problem with it? Please let me know if any ideas. Thanks
-
Hi, everyone I've finally started my link project. Yey! (though I still need an additional X-tra passive speaker kit, but that's another matter...) Anyway, the guy who sold me an X-tra speaker kit a while back also (very, very kindly) sent me loads of other cables, including a bit of MCL cable...
-
Having added a 5500 system to my ever growing collection, I have noticed a sudden loss to all sound comming out of the Left hand channels. SPK1, SPK2 and Headphones - irrespective of audio input. Have switched speakers round - not a speaker issue The line out channels are fine. Any idea as to whether...
-
I have a Master Control Panel 5500 that has a non funtioning volume ring ie. nothing happens when you turn it. All other keys work fine. I've installed new batteries; checked the micro switch with a multimeter and appears fine. Having searched the forums, this sounds like not an uncommon fault. However...
|
|
|