|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Site by Tags
Showing related tags and posts accross the entire site.
All Tags » Tonearms ( RSS)
-
Hello, I've been searching the internet for quite some while now for my issues. I have found my issue twice, both times unanswered. So perhaps its an easy solution, or an impossible one. I recently purchased a beogram 1700 in not too great condition, I more or less rescued it from the bin. But all...
-
Firstly, hello everyone! I was just given a BeoGram 2000 that had been sat in its box in a workshop for about 14 years, in really excellent condition, manuals and the lot, I was given it in good faith and told it was fully working when it was put in the cupboard, however there seems to be an issue with...
-
Hello all, after a a period of some months, I tried to play some records on my Beogram 4000 with no success. The tone arm does not move across! I removed the aluminium plates and I saw that the motor doesn't turn. I measured the voltsge on the cable motors and is 0 Volts? Do you have any idea about...
-
...mmm, good question. I can't read circuit diagrams but otherwise I'm not bad. Thanks, Brendan.
-
Using full automatic the tone arm my Beogram 6500 lowers itself a 1-2mm too soon. The needle barely touches the record and the slips off on to the platter. It happens for 33rpm, 12" LPs as well 45rpm 7" singles. When I use it manually the tone arm rises correctly at the end of a record and...
-
Hello All, This is my first post. I have been able to resolve my other issues by reading other threads and haven't given much advice due to my lack of experience. I thought I did a pretty good search for this topic but haven't found specifics. If there is one already, please point me to it. So...
-
Hi Frede, I am taking delivery shortly of a Beomaster 900RG which features, according to this erudite website (Beowrold) a Beogram 1000 with an ST/L 15 tonearm. Hence my original line of inquiry. There is available some original B&O SP12 cartridges so thought might invest in one of these. Seems you...
-
Next, I proceeded to clean the open switch in the near-right quadrant... Same process as above. Clean the open side first: Flipping this switch to the opposite position is accomplished by lightly pushing the white lever as shown - again, using very light fingertip pressure. Next rotate the aluminum platter...
-
Using acetone (the wife's nail polish remover) and a fine-tip paint brush, I began cleaning the switch in the far-left quadrant of the turntable: The switch: Cleaning first open side contacts with acetone and brush: Flipping switch to opposite position accomplished by pushing as shown with very light...
-
I am looking for information of the classic B&O PickUp or tonearms ST/A - ST/M - ST/L - ST/P --- 30 deg arms for SP1/2, and the next SP/L-15 deg. I hope you could give me informations of these tonearms - it could be links - scanned copies of documents. Anything is most appriciated. I am also looking...
Page 1 of 1 (10 items)
|
|
|