Hi hfat, I have the same or at least similar problems. Without a connected Beo5, many of my created buttons and commands are revomed, when I load the old config file with the 4.11 software. On the other hand, the software creates all source buttons with all commands according to the configured devices. I tried to save all my source buttons with all

[quote user="XavierItzmann"] I use LinkPlayer which is wonderful for all sorts of functionality. Nonetheless, with regards to your upgrade from XP to Win-7: please realize that BeoPort is 10-year old tech, like (presumably) much of your B&O kit. Just like one might not expect a BeoCord to fully integrate with the latest B&O equipment

Hi, I got following information from Beocare: Dear Mr. Streule. We refer to our previous correspondence concerning BeoPort, and we have now received a change in priorities. We are planning to correct this in an upcoming release of BeoPort planned to be released in February 2011. Best regards/Med venlig hilsen Benny Machon Market Quality Coordinator

Hi, I`um using config version 3.87 for a while on two different PC`s with Windows XP. I did not have any problems up till now. Yesterday, It tried to install the same version on a PC with Windows 7-64. The installation was not a problem but when I start the software, I have following problem: The Login window appears and I try to start in Offline mode

I had the same problem with distributing HD signal. I solved it with a HDMI splitter and a HDMI/IR-Ethernet-Tranceiver. So, the HDMI signal is splitted after the setop box. One HDMI cable goes to the BV10 in the main room. The other one goes to the HDMI/IR-Ethernet-Tranceiver. From this tranceiver, two CAT6 cables go to the second room where another

Hallo Räuber, Das Problem mit dem fehlenden Timer hatte ich auch, nachdem der Avant im Wohnzimmer einen Defekt hatte und die Reperatur sich nicht mehr lohnte. In der Zwischenzeit habe ich mir fürs Schlafzimmer einen BEOTIME besorgt und habe mich gut damit angefreundet. Mit dem Beotime lässt sich sowohl ein Sleeptimer wie auch ein Wakeuptimer

I`ll do that. I just recognised, that Linkplayer is also capable to access all sources in the room where Beoport is. I always thought, that I'm only able to use N.MUSIC and N.RADIO and does not have any access to CD, DTV and so on. With this feature, it could really be a very good replacement for the Beoplayer! In combination with my Ipad, it would

Hi Keiths, I feared, that this Feller remote is very speicific. I did another test with a Logitech Remote today. It is the model 895 with IR and RF transmitter. With this model I could setup the Feller and it worked. Maybe this could help you to find a solution. Again, thank you very much for your work! Hangglider

Hi elephant, In the meantime I calmed down (at least a bit). Finally, Beoworld is one important reasons not to sell the devices. You are right, this is certainly the best forum I know. For all my previous problems I got a solution with help of you members. So, regarding this Beoport problem I try to find another solution. I know from my dealer, that

Hi, after the answer from Beocare, I tried to make little pressure and sent them another email. They passed the information to the development department. Today, I got the a new response: Dear Mr. Streule. We refer to our previous correspondence concerning BeoPort, and we have now received a feedback from the responsible department. We must inform you