in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » Masterlink (RSS)
  • MCL/Masterlink - Fehlersuche und -Behebung

    Ich habe mehrere IR-Empfänger im Haus, die über MCL an ein MCL2P angebunden sind. Das MCL2P ist über Masterlink an eine Ouvertüre angeschlossen. Jetzt funktioniert auf einmal die Steuerung des Systems über die IR-Empfänger mit der Beo 4 nicht mehr. Signale der Beo 4 werden...
    Posted to Deutsche BeoWorld (Forum) by wolferich on 02-11-2012
  • What do I need to create a fully integrated beo-apartment?

    Dear all, I am a relatively new B&O fan, and I wondered if someone could help me out with a few questions about how things work and what I'll need. I would like to connect my curtains, lighting, audio and video using a masterlink connection after seing the rather inspiring video on the B&O...
    Posted to General Forum (Forum) by Beonic on 02-06-2012
  • Re: can I connect a MASTERLINK+RJ45 cable on a switch/hub ?

    [quote user="olvisab"]Cat 6 should be enough, don't you think[/quote] Cat 6 or 7 is of no importace as long you are using the cable for analog MasterLink or PowerLink. But the layout (construction) of the cable is very important! You need a screened / shielded cable + each twisted pair...
    Posted to General Forum (Forum) by Vienna on 10-07-2011
  • BeoNet: Digitales MasterLink?

    Hallo, ich habe inzwischen einiges gelesen und versuche es jettz auf die Reihe zu kriegen: 1) MasterLink & PowerLink 2 B&O geräte können, sofern beide damit ausgestattet sind, über MasterLink verbunden werden. Boxen werden über PowerLink an ein Gerät angeschlossen 2)...
    Posted to Deutsche BeoWorld (Forum) by Nio on 10-02-2011
  • Re: ML/CAT wiring projects

    Well, here is the init draft of the unit placement in the current building; the image shows (from top down) 2nd floor, first floor and the tiny basement. The plan is to wire up the house with a star network using double CAT7 cabling to be used for Ethernet and BeoNet; then the idea was to wire up one...
    Posted to General Forum (Forum) by kimhav on 09-21-2011
  • Re: Cabling questions

    The Cat7/Class F New Installation Concept Handbook will answer most of your questions ... http://www.abo-center.dk/Abo_center_2/reptips/diagrammer/Link/Cat7%20New%20B&onet%20handbook.pdf
    Posted to General Forum (Forum) by Vienna on 08-28-2011
  • Finally I found a used Beolab 3500 for my kitchen

    Hi guys, "A true and horrible tale from a dane with the dream of a new speaker." Finally I found it! A fairly new, but used, Beolab 3500 for my kitchen. I've been looking for one at a reasonable price for some time now, and finally it was there. Even my girlfriend loves the design. And...
    Posted to General Forum (Forum) by ClausMikkelsen on 08-03-2011
  • MasterLink control of PVR

    I have a Humax 9200 Digital Terrestrial receiver connected to an Avant with STB-C, and I can select programmes on this from a MasterLinked MX4002. However, the Humax includes a hard disk, in order to record programmes. To play these recordings on the Avant, I have to select <MENU><1> and...
    Posted to General Forum (Forum) by deaddruid on 08-01-2011
  • MX4002 link aspect ratio problems

    I've been trying to use MasterLink for the first time, and seem to be *almost* there. My problem is incorrect aspect ratio when displaying widescreen data from the Avant on the MX4002. The Video Master is an Avant RF VCR, with DVD1 attached to the AV port, and a Humax 9200 Digital Terrestrial box...
    Posted to General Forum (Forum) by deaddruid on 07-30-2011
  • Masterlink Gateway - Connection Problem

    Hello all, Earlier today I purchased a Masterlink Gateway to work with my B&O products. No manual followed, I've plugged the different cables in, connected by an ethernet cable. Lights up green - seems to be ok. But when I try to access my router configuration page to see if the Masterlink Gateway...
    Posted to General Forum (Forum) by aSkovk on 07-09-2011
Page 1 of 6 (51 items) 1 2 3 4 5 Next > ... Last ยป