|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » Beolink ( RSS)
-
Hello, I greatly benefit from my MX7000's "Audio AUX Link" 7-pin socket, which -connected to the AUX of my Beosound 2300- allows me to independly control the volume of both my Beolab 8000 (/w PL too MX7000) and my Beolab 3 (/w PL to 2300). Question: I'm considering a (second life) BeoVision...
-
[quote user="sodoi18"]I have a BW set-up connecting my BS1 to a BS4000. There seem to be a momentary gap in sound every couple of minutes...the gap is small enough not to be noticed..but if you pay attention you can catch it. The signal is not that problematic except with the gap mentioned...
-
[quote user="beobuff"]One last caveat: all of the BL Wireless 1s being shipped by BOA have the original buggy firmware version. Among other problems, the timer function does not, er, function at all. Neither the local B&O technician, the selling dealer, nor the tech support staff at BOA...
-
Looking back on that the BW1 has been available for quite a while now; does anyone have information when and what kind of modifations has been made to this unit since released?
-
Hi Beoworld, once again i find myself at the mercy of you experts in the WWW. A newly discovered problem is as follows. I have my BS9000 connected via Masterlink to my BV3/32 "think the most basic setup possible" just the BV3, Masterlink lead and BS9000 thats it no extra speakers, "as...
-
Do anyone know if B&O has plans to release BeoLink app for Android as well?
-
Hello, I know that there are a number of posts already regarding the new BEONET (not released yet?) and the existing Lexcom Home product. Both seem very similar but Lexcom use a non-standard cable correct? I have read the Cat7 New BO Installation Manual and it does say that both systems are approved...
-
Hi all, Is it possible to have two separate music systems connected to a BV7 via ML to play music through the TV's speaker setup? Current there is a BS9000 connected to the BV7 via ML and this works fine. Now if I add a second one, e.g. a BS5500 stack with the Beolink SW etc, can I set that up to...
-
Today B&O sent an email re the new BeoLink app for the iPhone (http://www.bang-olufsen.com/beolink-home-controller-iphone-app). I downloaded it, and was hoping for some for instant action, but the app started 'searching'. Can anyone fill me in on the rest of the requirements ... for example...
-
Hi I have a quick question about controlling a non B&O TV. I have a Beocenter 9000 and a Panasonic HD ready TV, Panasonic DVD Recorder and Sky HD Box. I'm planning on running a RCA Cable from my Sky box for audio but would like to know whats the best way (simplest or cheapest) of being able to...
|
|
|