Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Site by Tags
Showing related tags and posts accross the entire site.
All Tags »
BeoNet »
Masterlink (
RSS)
-
[quote user="olvisab"]Cat 6 should be enough, don't you think[/quote] Cat 6 or 7 is of no importace as long you are using the cable for analog MasterLink or PowerLink. But the layout (construction) of the cable is very important! You need a screened / shielded cable + each twisted pair...
-
Hallo, ich habe inzwischen einiges gelesen und versuche es jettz auf die Reihe zu kriegen: 1) MasterLink & PowerLink 2 B&O geräte können, sofern beide damit ausgestattet sind, über MasterLink verbunden werden. Boxen werden über PowerLink an ein Gerät angeschlossen 2)...
-
Well, here is the init draft of the unit placement in the current building; the image shows (from top down) 2nd floor, first floor and the tiny basement. The plan is to wire up the house with a star network using double CAT7 cabling to be used for Ethernet and BeoNet; then the idea was to wire up one...
-
There is a Handbook out that might answer many of your questions: Its called "Cat7/Class F New Installation Concept New Infrastructure Handbook" from B&O. PM me with your email and I can send it your way if your interested still. Covers the concept, cable management, reducing noise in PL...
-
Hello, I know that there are a number of posts already regarding the new BEONET (not released yet?) and the existing Lexcom Home product. Both seem very similar but Lexcom use a non-standard cable correct? I have read the Cat7 New BO Installation Manual and it does say that both systems are approved...
Page 1 of 1 (5 items)