|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
You have to set the correct Audio option for your BS 3200. Put all devices to standby. Go to the room with the BS 3200. Hit the (red) standby button & <LIST> at the same time. Press <LIST> until it says OPTION? Pres <GO> Press <LIST> until it says A.OPT, then press <2> /Frank
-
Hi Cristian, A tons of Logo Here: http://www.lyngsat-logo.com/ A online resizer here: http://www.picresize.com/ Logos must be resized to max: 92 * 44 pixels /Frank
-
You have to check the connections menu, if there's a V.TAPE2 device, and if so, you have to delete it. The MX4002 should have VIDEO.OPTION 6 /Frank
-
Du skal blot "Mute" højtalerne ved at trykke midt på volume-knappen, hvis du bruger en Beo4. På en Beo5 skal du dreje volume hjulet hurtigt til venstre. /Frank
-
If anybody got a version of the "old" Lintronic Configurator v.1, we could use the Code Learn section without a Lintronic box, to convert the pronto codes to something usefull. Anyone ?!? /Frank
-
Make a new entry i your analoge tv channel list the (frequency doesn't matter), edit the entry and mark it to use "decoder" and save it. To activate your Philips DVD you just select TV and enter the new channel number. Then you can control it with your Beo5. /Frank
-
Thanks Keith, Now I undestand the bit-string. I would like to build my own XML-parser, but i can see there's a long way to go. There's a lot to protocols to learn, and specifications to read. I would like to get my hands on a DEC(PUC) file and the specs to study. Regards Frank
-
[quote user="Keith Saunders"] Frank, I can confirm that this Pronto HEX code string is valid and decodes to:- Carrier Frequency of 37,683.1 Khz Protocol is NEC The product device code in HEX is 87 The Power Command code in HEX is 12 which is the standard NEC power command NEC binary string decodes to 00011110 10000101 10110111 01001000 1 which
-
Jeg kan bekræfte at det virker lige så godt med 38000 som med 38, ingen forskel der. Keith har lavet en komplet fil med alle knapper. Der kan så være noget kosmetisk arbejde, men alt virker uden buffring og hangups! Så nu er der kun de kendte problemer med firmware på boksen: EPG er en katastrofe, man kan ikke redigere
-
Hej Jacob, Den virker 100%! Hvad er forskellen på din metode og så Keiths? Ved du hvorfor man ikke kan konvertere pronto koder vha. LinTronics Configurator->Codelearn->LinTronic Converter Convert knappen er grayed-out! Mvh Frank
|
|
|