|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 01-07-2010 9:23 AM by frankmj. 30 replies.
-
01-04-2010 3:54 AM
|
|
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej.
Jeg er lige skiftet fra Viasat til Canal Digital, og ville frygtelig gerne kunne styre Sat-box'en fra min Beo5, da PUC-software'n ikke er særlig stabil på min Beovision 7-40 Mk. III. Der går lang tid før den reagerer på første input efter standby (den buffrer det i 20-30 sekunder). Andre gange hænger den sig bare op, men reagerer på den org. fjernbetjening.
Er der nogen der har lavet denne XML-fil?
På forhånd tak
/Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hvor bor du, det er ikke så svært at lave filen selv.
Mvh
Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Jeg bor i Helsingør. Man skal vel kunne "læse" tastetryk ind i en form for IR-modtager?
/Frank
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej,
Du skriver det ikke er så svært. Kan du være lidt mere detaljeret. Jeg har rimelig god teknisk indsigt og har også arbejdet med XML programmering før. Så hvis du kan give mig et hint, ville jeg blive meget glad.
Keith sendte mig en XML-fil til en anden CD remote. Så han kan heller ikke hjælpe. Jeg kan ikke finde nogen Pronto koder, og jeg ejer ikke selv en IR-læser.
/Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej
Det er ikke så svært, men det kræver lidt arbejde. Den måde jeg har gjort det på er følgende.
Jeg har en iPaq 2210, og med "Remote Control II" software på den, kan jeg aflæse IR signaler i pronto format. Derefter er det "bare" at konvertere pronto til Beo5 hex koder(det har jeg et javaprogram til), og så generere XMl filen med de kommandoer der er aflæst.
Så ja, du skal have noget der kan dekode din remote, og så er det ellers bare at håndkode en XML fil.
Jeg er igang med et lidt større projekt der vil gøre det nemmere for folk at generere disse XML filer, men jeg er ikke kommet så langt endnu. Så indtil videre er der kun den hårde vej.
Mht xmfilen, så kan du sagtens bruge den du har fra keith som skabelon, og bare ændre navne og IR koderne på de forskellige knapper direkte i XML filen.
Jeg bor i værløse og jeg vil ikke afvise at kunne hjælpe dig, jeg har bare lidt travlt for tiden.
Mvh
Jacob
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Prøv at lave en XML fil med dette indhold, og se om det fungerer.
****************
<?xml version='1.0' encoding='utf-8'?> <root stVersion='1.3'> <resource><image stName='NonBO' stFile='images\NonBO.BMP'/></resource> <product stName='Sagem ITSD81HD' stCaption='Sagem ITSD81HD' stMenuCaption='Sagem ITSD81HD' stImage='NonBO' stProductType='accessories3Party' stScreenType='1'> <source_item stName='ITSD81HD' stCaption='ITSD81HD' stScreenType='0' stMenuCaption='ITSD81HD' stSourceType='accessories3Party' nPreferedRow='4' nPriority='1' nPreferedColumn='1' nPage='1' nX='0' nY='95' nWidth='213' nHeight='25' nRowFinal='4' nColumnFinal='0'> <source_subItem stName='ITSD81HD\Power' stCaption='Power' stMenuCaption='Power' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=1#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=1#Comment=NEC 32bits=1E85B748' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='0' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='0'/> <source_subItem stName='ITSD81HD\Up' stCaption='Up' stMenuCaption='Up' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010100101111110100001#ALTBIT=1#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=1#Comment=NEC 32bits=1E852FD0' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='213' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='1'/> <source_subItem stName='ITSD81HD\Down' stCaption='Down' stMenuCaption='Down' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010111001111001100001#ALTBIT=1#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=1#Comment=NEC 32bits=1E85CF30' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='426' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='2'/> <source_subItem stName='ITSD81HD\P+' stCaption='P+' stMenuCaption='P+' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010101011011101001001#ALTBIT=1#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=1#Comment=NEC 32bits=1E855BA4' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='0' nY='45' nWidth='213' nHeight='25' nRowFinal='2' nColumnFinal='0'/> </source_item> </product> </root>
***********************
Bare kald filen "Sagem ITSD81HD.xml" og smid den ind i "Beo5 Configuration Tool\ThirdParties" biblioteket
Mvh
Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej Jacob,
Desværre er der ingen af "knapperne" der virker.
Jeg har fået fingrene i Dell Axim X50v m. Windows Mobile v4.21.1088. Tror du den ville kunne køre "Remote Control II"?
Mvh. Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Det er meget underligt at det ikke virker, det er taget direkte fra PUC filen som tv'et bruger.
Hvis din Dell Axim har IR modtager, så tror jeg godt du kan få remote control til at virke.
P.S hvilken firmware kører din Beo5 ?
/Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Den har den nyeste: 1.41e
/Frank
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Jeg har lige checket at den aktiverne IR-dioderne med mit digitale kamera. De 2 yderste tænder når jeg trykker på en af knapperne.
/Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Det er helt sikkert et timingsproblem, jeg har lavet lidt flere knapper med forskellig timings du kan teste med, så kan du se hvilken af dem der virker.
*********
<?xml version='1.0' encoding='utf-8'?> <root stVersion='1.3'> <resource><image stName='NonBO' stFile='images\NonBO.BMP'/></resource> <product stName='Sagem ITSD81HD' stCaption='Sagem ITSD81HD' stMenuCaption='Sagem ITSD81HD' stImage='NonBO' stProductType='accessories3Party' stScreenType='1'> <source_item stName='ITSD81HD' stCaption='ITSD81HD' stScreenType='0' stMenuCaption='ITSD81HD' stSourceType='accessories3Party' nPreferedRow='4' nPriority='1' nPreferedColumn='1' nPage='1' nX='0' nY='95' nWidth='213' nHeight='25' nRowFinal='4' nColumnFinal='0'> <source_subItem stName='ITSD81HD\Power1' stCaption='Power' stMenuCaption='Power' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=0#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=0#Comment=NEC 32bits=1E85B748' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='0' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='0'/> <source_subItem stName='ITSD81HD\Power2' stCaption='Power2' stMenuCaption='Power2' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=0#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=38584#Carrier=38000#REPEATSIGNAL=0#Comment=NEC 32bits=1E852FD0' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='213' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='1'/> <source_subItem stName='ITSD81HD\Power3' stCaption='Power3' stMenuCaption='Power3' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=0#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=4460#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38000#REPEATSIGNAL=0#Comment=NEC 32bits=1E85CF30' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='426' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='2'/> <source_subItem stName='ITSD81HD\Power4' stCaption='Power4' stMenuCaption='Power4' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=0#MARKFLANK=568#SPACEFLANK=1674#SPACE2FLANK=556#PRESIGNALHI=4460#PRESIGNALLO=4460#Pause1=38584#Pause2=38584#Carrier=38000#REPEATSIGNAL=0#Comment=NEC 32bits=1E855BA4' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='0' nY='45' nWidth='213' nHeight='25' nRowFinal='2' nColumnFinal='0'/> </source_item> </product> </root>
*********
Du skal genstarte config tool, og fjerne sagem fra din produkt fane, og tilføje den igen for at få den opdateret i din Beo5
/Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Jeg er utroligt glad for du gider at hjælpe mig Jacob, men jeg kan ikke få nogen af dem til at virke - desværre.
Jeg har downloaded trial-versionen af Remote Control II. Den er desværre meget ustabil, på den lånte Dell Axim X50V. Har du en full version der virker bedre?
/Frank
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Jeg har prøvet at indlæse <Power> knappen i IR-databasen på Remote Control II programmet og når jeg sender koden via Axim'en virker den også.
Her er hex-koderne:
0000 006E 0022 0002 0155
00AB 0015 003F 0015 003F
0015 003F 0015 0015 0015
0015 0015 0015 0015 0015
0015 003F 0015 0015 0015
003F 0015 003F 0015 003F
0015 003F 0015 0015 0015
003F 0015 0015 0015 0015
0015 003F 0015 0015 0015
0015 0015 003F 0015 0015
0015 0015 0015 0015 0015
003F 0015 0015 0015 003F
003F 0015 003F 0015 003F
0015 05E0
/Frank
|
|
-
-
Keith Saunders
- Joined on 04-16-2007
- Technical Advisor, Little Ann, Hampshire, UK
- Posts 3,810
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Frank,
Your Pronto HEX code string is invalid.
Try using the following for POWER
<source_subItem stName="POWER" stCaption="POWER" stMenuCaption="POWER" stScreenType="0" stIR="NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=#MARKFLANK=578#SPACEFLANK=578#SPACE2FLANK=1708#PRESIGNALHI=8993#PRESIGNALLO=4496#Pause1=65000#Pause2=65000#Carrier=38#REPEATSIGNAL=1#Comment=NEC 32bits" stLeave="Rel 1" stIRVideoOp1="1" stIRVideoOp2="1" stIRVideoOp4="1" stIRVideoOp5="1" stIRVideoOp6="1" stIRAudioOp1="1" stIRAudioOp2="1" stIRAudioOp4="1" stIRAudioOp5="1" stIRAudioOp6="1" stIRVideoOp2Av="1" stIRVideoOp4Av="1" stIRVideoOp6Av="1" nPage="1" nX="0" nY="20" nWidth="213" nHeight="25" nRowFinal="1" nColumnFinal="0" nHidden="0" />
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Keith,
It works!
What was wrong with the HEX code string?
Regards
Frank
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
I found the error!
Here's the right sequence:
0000 006E 0022 0002 0155
00AB 0015 003F 0015 003F
0015 003F 0015 0015 0015
0015 0015 0015 0015 0015
0015 003F 0015 0015 0015
003F 0015 003F 0015 003F
0015 003F 0015 0015 0015
003F 0015 0015 0015 0015
0015 003F 0015 0015 0015
0015 0015 003F 0015 0015
0015 0015 0015 0015 0015
003F 0015 0015 0015 003F
0015 003F 0015 0015 0015 !!! I missed this line !!!
003F 0015 003F 0015 003F
0015 05E0
Is there an easy way to convert pronto codes to XML lines?
Regards
Frank
|
|
-
-
Keith Saunders
- Joined on 04-16-2007
- Technical Advisor, Little Ann, Hampshire, UK
- Posts 3,810
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Your Pronto HEX code is still invalid because you have 6 HEX values missing.
There is no easy way to convert Pronto codes other than do what I did and write a Windows based program.
|
|
-
-
Keith Saunders
- Joined on 04-16-2007
- Technical Advisor, Little Ann, Hampshire, UK
- Posts 3,810
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Frank,
As you have previously told me that the POWER command I sent you works, it therefore means I should be able to work out most of the others.
I have created an XML file for you to try HERE
Extract file to C:\ to ensure it automatically goes into the correct directory.
Let me know if it works
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Thanks Keith, you are the best!
It works very well, just some issues with hard buttons. But that can be worked out (standby doesn't work).
I think I only missed 4 hex codes to a total of 76. I'm not very good friends with the Windows mobile text editor.
It's importent to me, that i can trust the program I use to catch the pronto codes with. So can you please confirm that these 76 hex codes are correct for the <Power> button:
0000 006E 0022 0002 0155 00AB 0015 003F 0015 003F 0015 003F 0015 0015 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 003F 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 003F 0015 0015 0015 0015 0015 0015 0015 003F 0015 0015 0015 003F 0015 003F 0015 0015 0015 003F 0015 003F 0015 003F 0015 05E0 0155 0055 0015 0E3F
Regards
Frank
|
|
-
-
Keith Saunders
- Joined on 04-16-2007
- Technical Advisor, Little Ann, Hampshire, UK
- Posts 3,810
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Frank,
I can confirm that this Pronto HEX code string is valid and decodes to:-
Carrier Frequency of 37,683.1 Khz
Protocol is NEC
The product device code in HEX is 87
The Power Command code in HEX is 12 which is the standard NEC power command
NEC binary string decodes to 00011110 10000101 10110111 01001000 1 which translates to 875E and 12ED
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Thanks a lot Keith!
In danish: Undskyld til alle Skandinavere, at vi førte en del af konversationen på (tilnærmet) engelsk.
/Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej igen
Hmmm, jeg kunne godt tænke mig hvis du prøvede min første xml kode igen, men ændre "carrier=38000" til "carrier=38", det er mere for at jeg kan få ro og vide at min kode faktisk burde virke :)
/Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej igen
Har lige prøvet med den første fil (hvor carrier er rettet til 38), men ingen af knapperne virker.
/Frank
|
|
-
-
Weebyx
- Joined on 06-30-2008
- Denmark
- Posts 321
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Ok, vil du lave en sidste test for mig :)
Prøv med dette for power
<source_subItem stName='Power' stCaption='Power' stMenuCaption='Power' stScreenType='0' stIR='NEC:GlobalManual=1#IRSEQUENCE=NEC#BITS=000111101000010110110111010010001#ALTBIT=#MARKFLANK=556#SPACEFLANK=568#SPACE2FLANK=1674#PRESIGNALHI=8748#PRESIGNALLO=4460#Pause1=38584#Pause2=95498#Carrier=38#REPEATSIGNAL=1#Comment=NEC 32bits=1E85B748' stLeave='Rel 1' stIRVideoOp1='F0:TV:' stIRVideoOp2='F0:TV:' stIRVideoOp4='L_F0:TV:' stIRVideoOp5='F0:TV:' stIRVideoOp6='F0:TV:' stIRAudioOp1='F0:RADIO:' stIRAudioOp2='F0:TV:' stIRAudioOp4='L_F0:TV:' stIRAudioOp5='F0:RADIO:' stIRAudioOp6='F0:TV:' stIRVideoOp5Link='L_F0:TV:' stIRVideoOp6Link='L_F0:TV:' stIRAudioOp5Link='L_F0:RADIO:' stIRAudioOp6Link='L_F0:TV:' stIRVideoOp2Av='F0:RADIO:' stIRVideoOp4Av='L_F0:RADIO:' stIRVideoOp6Av='F0:RADIO:' stIRVideoOp6AvLink='L_F0:RADIO:' nPage='1' nX='0' nY='20' nWidth='213' nHeight='25' nRowFinal='1' nColumnFinal='0'/>
/Weebyx
|
|
-
-
frankmj
- Joined on 04-18-2007
- Denmark
- Posts 177
|
Re: XML fil til Beo5 Config Tool for Sagem ITSD81 HD
Hej Jacob,
Den virker 100%!
Hvad er forskellen på din metode og så Keiths?
Ved du hvorfor man ikke kan konvertere pronto koder vha. LinTronics Configurator->Codelearn->LinTronic Converter
Convert knappen er grayed-out!
Mvh
Frank
|
|
|
|
|