|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » wiring ( RSS)
-
New guy, first post... My BM 5500 just arrived from sunny Florida, only thing I forgot when I placed my bid: US mains So, I have a unit which says 120V @ 60 Hz on the backplate. Won't play too well in a 230V @ 50 Hz Euro socket... First thing I did was to open it, to see if I saw anything that would...
-
After searching the forum I could not find an answer to what seems like a small and simple problem, so here it is: I changed my Beolab 7-1 for a 7-4 (because in surround setup I think it sound much better). Upon installing I noticed the power out socket on the back of my new 7-4 was covered with some...
-
Bonjour, This might be a simple question to some of you but, on a pair of Penta 3, I just had the midrange refoamed and now I have a doubt on the wiring. On the 4 midrange speakers, the 2 middle ones are cross-wired, but I did not mark the wires properly and now on one - is connected to -, and the other...
-
Dear all, Sorry for what must be a very basic question. I have a beomaster 5500 that I would like to connect up to my two extra speaker kits. It seems from the MCL2 manual that I have two options: 1. Use one of the four 7 pin Din connections (most sensibly Aux) to connect to the MCL2 2. Wire up two proprietary...
-
Morning all! I wonder if anyone could please help - my other half's son, bless him, moved the AV9000 the other day - and didn't realise that the wire which connects the TV to the sound unit was still plugged in when he detached them (fortunately only the one for the stand to rotate, not one of...
Page 1 of 1 (5 items)
|
|
|