I have tried a similar question earlier with no response… In my living room I have a BeoSound3200, and in my bedroom a MX4002. The two pieces are connected via MasterLink together with a BeoPort. I use the MX4002 as a normal TV and as a Link room speaker. In my living room I can access the following...

Hi all, I just bought an AppleTV and to my horror discovered that it cannot be connected via the scart input. I would like to connect the aTV via component PrPbY as I understand this is the only way to make distributian via Masterlink possible - as opposed to the DVI. However, the three component input...

I finally got some time to check the wiring. I cut most of the connections I had made and re-connected what I considered marginal. Sadly, no luck with the Beolab 2000. Here's what's going on now. With the ML cable disconnected from the BL 2000, pressing the play button changes the mode from standby...

Hi Keith, Seeing as the wiring doesn't need to be crossed, e.g. data- to data+, then it makes sense that I messed up the wiring somewhere. You mentioned that the screen of each section of cable needs to be connected - should I connect all ground wires together, i.e. six connected together when joining...

During a remodel, I wired our house with ML cable. I have a BeoSound 9000 and Beolab 2000 in a separate room that I want to connect. I am having difficulty arranging for a B&O installer to come and add plugs and junction boxes to all my cable. So, being cheap and impatient, I cut the ML cable that...

I would like to install four Masterlink wall sockets. Ideally, each of these would have an F connector on the same unit, since I use these for aerial connection. I such a device available? If so, where would I get them from? I'm in the UK, but happy to order from overseas. An alternative might be...

I understand that the Beosystem AV9000 powers the AV9000 Audio Kit via the MasterLink cable, and that it is the only B&O product to do this (the other BeoLink boxes having built-in power supplies). However, the BeoTech minisite just shows a single MasterLink pinout. Would I be correct in thinking...

Great fun reading the forums! Started buying B&O stuff back in the 80ies and by now my house is "well equipped" (my wife would use more profane words).... But, I have really never been able to crack the Link Option logic, given that there is one ;-) Anyway, in this case I have - a BeoSystem3...

Hi everyone, I have missed the posts and camaraderie here... I'm still thinking of a BV8, but I was curious how to integrate it into my setup, if and when I do get it. Currently I have a BS9000, connected to a BL2, and a pair of BL3s. I'd ideally like to ML the BS9K to the BV8, if I do this,...

Hello I have a Beocenter 1 from 2005 (Typ no: 8523, SW:2.5, Acc: ML STB DSS) in one room connected to a Pace twin turner PVR , a VX7000 VHS and with a ML cable to the Beoport (SW: 4.65). I have recently got B&O to connected these products with my Beosound 9000 (SW:2.21) (with a ML cable) and BeoLab...