Stefan you've solved 2 of the 3 problems I had with my beo5 !!!!!!

The third problem (relating some Beo5 hard keys) is explained with detail from here on

Do you have any idea?

Thank you in advance. 

-

Welcome to the forum BeoBoy Lit.
Try not to be too shy.

Andy T.

Sorry, I have no HDR2. But I have borrowed one from my dealer and programmed 2 soft keys: 0:000:VTR:CNTL_WIND and....REWIND (yellow and green) with arrows left/right. It`s exactly what you did. Should also work with hard keys..(?).I have some hard keys reconfigured using a STB including macros. Works great. Maybe you could try to change the adress: 0:000:TV:CNTRL_WIND ....REWIND..but I don`t really know. Good Luck Stefan

stefan:

I have borrowed one from my dealer and programmed 2 soft keys: 0:000:VTR:CNTL_WIND and....REWIND (yellow and green) with arrows left/right. It`s exactly what you did. Should also work with hard keys..(?)...Maybe you could try to change the adress: 0:000:TV:CNTRL_WIND ....REWIND..but I don`t really know. Good Luck Stefan

No luck here Stefan  

I tried long time ago the on-screen buttons and those worked well, but I want to use the Beo5 "<<" ">>" hard keys for a quick "blind" daily use.

Unfortunately I've tried all the combinations using "TV""VTR""WIND/REWIND""CNTL_WIND/REWIND"...with no success at all

It seems like if those two hard keys inside the VTR (HDR2) section doesn't admit any "reconfiguration" via software and always work as "previous""next" commands
However, inside the CD section this software reconfiguration works very well and the beo5 "<<"">>" hard keys function now as "rewind""wind" for the BS9000 (no more as "previous""next")

 

Regards. 

Hello everyone, 

I need HELP AGAIN! I've troubles to configure my beo5

It's a similar problem than before, about using the 4 arrows control inside a command

I cannot do work BALANCE or FADE options with my beo5 (hard keys or screen keys)

With Beo4 I use the 4 key arrows inside the SPEAKER command  to control those options... but after several attempts I don't know how configure the correct IR code keys in Beo5 to achieve these functions

Thanks in advance for any help. 

Choosing BV7 as product will create a button "Speaker..." incl. submenu with mode 1 - 5 and a button "Balance". Pressing "Balance" will open a submenu with 4 buttons: Arrow up/down and arrow left/right. These should control the functions you are looking for. 

Stefan, Which model of BV7 should be used? I tried it before with the picture format question but couldn't get what you described.

Andy T.

Hi Andy, I have a BV7 MK II and audiomaster is BS 9000. Did you try to get the "Picture"-button? I think, it did work for Santiago... (?)

I have to tell mine that I have an Ouverture or I won't get tape commands for my Beosystem 7000.
I wonder if it's something to do with that. I'll try again when I get the time.

Andy T.

Hi Andy, I had explained that here

and here specifically for you!!

Read the two last lines (PD)... 

Cheers my friend. Time for another little play I think.
In my Client file I am saving lots of different configurations by adding a letter to my serial number.
That way, I can revert to a previously stored config.

Andy T.

My beo5 counter shows: Config. Download (times): 134!!!

to be continued...