in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Beocom 6000
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 12-20-2007 3:23 PM by Keith Saunders. 30 replies.
Page 2 of 2 (31 items) < Previous 1 2
Sort Posts: Previous Next

  • 12-19-2007 12:45 PM In reply to

    Re: Beocom 6000

    Reply Contact
    hi,

    all of my beocom 6000's are just that, not beocom 1's...

    they are all the early mk1's w/ the dot.

    they all work great except the one in question. it will not find the base. i noticed that using .70001 -that the software listed is quite different than any of the functioning units. w/ regards to the decal beneath the battery...

    1.) good: b&o decal stating 1070156
    2.) bad: (2) small round decals -1 w/ "40" -2 w/ "46"

    reg'ing the software...

    1.) good: 001-1.60 0103071019-2G4
    2.) bad: 032-1.20 9901261126 


    ++++edit++++

    the supplied charger is usa -the phone charges fine, etc... -just can't find the base during registration.


    • B&o bottle opener

  • 12-20-2007 12:53 PM In reply to

    Re: Beocom 6000

    Reply Contact
    Based on everything you have said, I think you may have a faulty RF chip in the handset, it is quite common. If this is the case, then the only way to fix the phone is to upgrade it to a Mark II because the RF chip and module it is on are no longer made.

    Regards Keith....

  • 12-20-2007 3:02 PM In reply to

    Re: Beocom 6000

    Reply Contact
    yikes, what a "bummer" -i'll give my local dealer a shout! or look for the guts of a cosmetically tired one.

    thx again!


    ++++edit++++

    hmmm... but wonder why the software readout is so different on this one bad phone?

    (5) good 6000's all w/ similar software readings -and this (1) bad one w/ the odd readout?

    hmmm...
    • B&o bottle opener

  • 12-20-2007 3:14 PM In reply to

    Re: Beocom 6000

    Reply Contact
    You can purchase a B&O upgrade kit p/n 3455103 which has all the parts required to upgrade a Mark I Beocom 6000 to a Mark II and still use the Mark I charger. The kits cost around $70

    Regards Keith....

  • 12-20-2007 3:16 PM In reply to

    Re: Beocom 6000

    Reply Contact
    thx!

    please see my edit to previous post.
    • B&o bottle opener

  • 12-20-2007 3:23 PM In reply to

    Re: Beocom 6000

    Reply Contact
    It was the apparent software version of the bad Beocom 6000 is why I said what I did.

    Regards Keith....
Page 2 of 2 (31 items) < Previous 1 2