Gavin, Have you checked where your scart cable is plugged into the sky box? I had a similar problem last year after i rewired the system and it turned out I had connected to the TV to the secondary scart on the sky+ box (vcr or something) rather than the primary one.... Took me a week to realise what was causing the problem! Cheers Warren

Thanks Keith.... Any idea if the beocentre 6 supports appleremote? If so do you know what software revision I need? Thanks Warren

Bump... In the hope that someone has an answer?

I am aware that the newer Beosystem 3 supports Apple TV through the PUC but does anyone know if the latest STB controller software in the beosystem 2 supports it? Thanks Warren

It could be the PC version running under parallels or vmware fusion??

Hi, I have a mac mini connected to my beosystem 2 through the VGA socket. Should I be able to access the pc input in my link rooms? I have tried selecting PC and L-PC in the link room but I just get a blank screen..... I know that the Beomedia can be called up via PC in a link room so thought this should work instead??? Any help will be much appreciated

Hi Steve The way I have it setup is with the main aerial coming into the master video source (in my case a beosystem 2) and then the link tv aerial socket is connected to the link areial output socket on the master. The master unit feeds the regular rf signal through as well as the link video signal so you can still watch regular terrestrial programs

Does the Beoport not receive the PC commands via masterlink?? If so can it not respond to the pc commands via masterlink instead of the attached IR receiver? I have only 1 receiver attached to my beosystem 2 and would like to control frontrow without fitting an additional sensor in the room....

Fil: Hi Keith and everyone interested in Lutron. I found this site..................prices look good to me Hope the link works! http://www.onidserv.com/?shop=lutronshop&link=lutron_google_ls&gclid=CPy7ioO3vYoCFRy4EAodFQvJQA Have just purchased a 4 channel B&O unit from these guys last week.... Will let you know how I get on when it arrives

Solved it myself..... Just needs reading the updated manual properly (thanks beoworld - looks like my manual is out of date!) In case anyone else has problems accessing the camera input menu: Go into menu chose 3 for setup go down to connections and press menu press go to enter camera input selection Been looking for this one for months!