Thank you, Kelvin had send me the picture. I do browse the post related to 4002 previously, it solve some of the problem then some other problem exist. I do have the service manual for 5513 which similar but slightly different from 5511. It seems they are many variant on 4002. Most of the photo /pcb seems different from my 4002. Lucky kelvin's is

Hi, i have some problem on this beogram need you guy's help. 2 of the cable broken in the red circle part, and i not sure whether i connect it correctly. the green and black wire broken.So i just connected it by guess work. Anyone have similar TT? can you take a photo on this part The problem now is that when press "Start“button, the

Dear all, I have a problem that only 1 channel have the sound, any advices?

u manage to solve the problem? All the e-cap in your TT still the old original cap? If yes then suggest you to chnage all the e-cap and tantalum cap.

Dear Martin, The lamp is working....

I have a Beogram 4002 type 5511 and encounter some problems maybe you guys here can help/advise me. 1) after the arm drop down to play LP, it will just static, so the music is keep repeating at the same position. 2) left channel no sound or extremely low volume Any advice on this? The motor (for the arm) can move by pressing >> or <<

I have solve the problem partially. The arm will stop at starting point of the Lp now. But still have 2 problem can't solve: 1) after the arm drop down to play LP, it will just static, so the music is keep repeating at the same position. 2) left channel no sound or extremely low volume Anyone know what the fuction of the NEC 2SC1003 IC? Any advice

D ear all, I'm new to this B&O 4002. Need soem guidance / advice form you all. I have a beogram 4002 but encounter some problem as below: 1) when presss "start" button, the arm will move to the center of the LP and the motor for the arm won't stop (keep running). It will on stop when i press "down/play" Since the arm

Hi, i have a problem with my Beogram 4002 which need your advice. after i press the "start button" the linear arm will move to almost center on the LP and the motor will keep running (non- stop), i had to press the "down/play" button the motor of the arm will stop. then i will need to press ">" to move the arm to the