Hmm… that doesn't sound good then… all the replacement stylus I've seen for the SP6-7 have the plastic part attached to the stylus. As did the old stylus when I took the metal cover off. So the stylus I bought had the plastic piece attached… https://shop.mantra-audio.co.uk/acatalog/Bang_and_Olufsen_stylus.html So essentially

Ah… okay - i'll take a look. I've managed to take a few pictures to see if that can shed anymore light… it really looks like the needle is either too short or there's something wrong with the plastic piece at the bottom f the styli that is stopping it short… but everything I can see looks good, no blocks or bent metal

Thanks for the reply Peter, much appreciated as I'm starting to struggle without my vinyl! By Suspension, I presume this is the metal cap that slides off the cartridge (sorry, I'm new to all of this). On further analysis, should this cap slide all the way back to the metal rim of the cartridge when it's placed back on and secured with the

Hi Beoworld - i've recently had to change my needle on an SP6-7 cartridge, however the replacement styli I purchased, although looks correct and is the one I was directed to buy, doesn't seem to be correct unless I've done something wrong in the fitting. The styli doesn't seem to protrude out of the cartridge far enough out of the cartridge

Hi - I picked a 1202 up from ebay a while back which I love. The only slight 'niggle' I have is that the downstroke is out by 1/4 of an inch or so, causing the pickup arm to drop short of the record when I press the Lift button. Having looked through the service manual it looks like there are two nuts that I need to adjust for the 17, 25 and