in Search

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » repair » technical » workbench (RSS)
  • Front Panel Fonts

    I am working on restoring a Beomaster 1700 amp, and would like to be able to be able to repair damage to the printing on the slider controls and front panel. What fonts did B&O use in their designs, and do members have any recommendations or tips for restoring damaged front panels? It seems to be...
    Posted to The Workbench (Forum) by ormej01 on 01-11-2012
  • Beolab 2500 - Voltage Problem

    Hi Guys, I've just joined and am starting off with problems !!! - I have inherited a pair of Beolab 2500 speakers, but they are set for 120V and not for 240V supply - I've been doing a bit of reading on this forum and there are some posts which say that the transformer can deal with both inputs...
    Posted to The Workbench (Forum) by Crawford on 12-18-2011
  • BEOVISION MX 5500 (3251) Multiple Problems?

    Hi, I have a BEOVISION MX 5500 (3251) That is having multiple problems? I juts picked up a car load of older B&O stuff from a Beophile downsizing and this was in the mix. I live in the USA and am trying to connect the TV to an over the air Digital TV box. I have tried to connect it through the co...
    Posted to The Workbench (Forum) by Veloseller1 on 03-09-2010
  • Need help with Beocenter AV5 will not enter the MENU

    Hallo, I need help. I bought some Beocenter AV5 from a hotel here in Stockholm where they said to me that device makers are ordinary consumer TV, s but now it appeared that it did not come in (Menu) via remote control, could someone tell me why I can not may come into menu? Are they perhaps the hotel...
    Posted to The Workbench (Forum) by BegBeo on 05-05-2009
  • Bang & Olufsen Red Line Authentic DIY ABR (Auxiliary Bass Radiators) Successful Repair

    Design concept failure As we all know, after about 15 or so years the foam used in B&O & many other manufacturers speakers turns to mush, cones fall away, speakers become seemingly useless. A market has arisen providing a readily available supply of replacement foam rubber rings, and appropriate...
    Posted to The Workbench (Forum) by BeoMatt on 03-11-2009
  • Beovision Avant 28" can not be turned on from stand-by mode

    Since a few months I’m the happy owner of a 2hand Beovision Avant 28” VCR 50Hz/MK-I/MK-II, type 8111 (yes, a pretty old one J ). The set was equipped with a new tube (as was said to me by the private person who sold the set to me). After installing the Beovision at my home, sometimes the...
    Posted to The Workbench (Forum) by Artimes on 01-23-2008
  • Beocord 2200 Problem

    Hi all, I've finally got around to repairing my 1976 Beocord 2200 - type 4601, which I've had since new. The 2 problems are very specific: 1. When pressing PLAY >, with no cassette inserted, both the tape cogs rotate as expected. With a cassette inserted, the forward cog (pull) does not rotate...
    Posted to The Workbench (Forum) by yachadm on 01-06-2008
  • Avant Sound

    Today the sound on my Avant just went out. Doesn't matter which input I use, nothing. I'm wondering if there is a test that I can run or whether I have to have a technician come in and do service. I can't find my manual, and the online manual in "My Bang & Olufsen" doesn't...
    Posted to The Workbench (Forum) by lmsmith on 08-26-2007
Page 1 of 1 (8 items)
Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly Need a cable? Just ask Steve at Sounds Heavenly
Beoworld Security Certificate