ATV2 and Beovision 6 (DVI) -

Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

Latest post 10-27-2011 1:43 PM by elephant. 1 replies.

Page 1 of 1 (2 items)
	Sort Posts: Previous Next

10-27-2011 5:35 AM

Weisdal
Joined on 10-27-2011
Posts 1

ATV2 and Beovision 6 (DVI)

Reply Contact

Hi.

I have a ATV2 and a Beovision 6 (DVI only). Connected with HDMI to DVI, and from optics to R/L (Converter) My ATV2 i running software version 4.3. No problem.

When I upgrade to 4.4 there is no picture on my BV6? Connecting PC monitor to ATV2 - Works. Connecting PC to BV6 - Works.

So i ended up downgrading ATV2 to version 4.3. Everything works again!!

Annyone experienced this, and solved it?

Regards

Klaus

10-27-2011 1:43 PM In reply to

elephant
Joined on 04-16-2007
Melbourne, Australia
Posts 2,215

Re: ATV2 and Beovision 6 (DVI)

Reply Contact

Two thoughts ...

4.4 seems to have been buggy and is already updated to 4.4.2 ... perhaps try again ?

And part of the 4.4.x upgrade has been to add a range of resolution and scan rate options to the ATV2 ... perhaps the mismatch is happening at that level ?

First B&O (1976) was a Beogram 1500 ... latest (2011) change has been to couple the BL11 with the BL6Ks *sounds superb*

Page 1 of 1 (2 items)