Hi could someone help with how to access the service counter on my new(second hand) beovision 6?

Hi,

When it asks for the PIN CODE press and hold << for 3 seconds

The Master code menu appears

Enter the service Code 11111

NOTE Be very careful in there. You can seriously ruin your TV if you don't know what you're doing.

Steve

Thanks Steve.Tried that but it wont accept 11111 as the Mastercode.Should i try the existing Pin?Danny

That was for the BV6 26 If you have the 22" enter the setup menu and press 0, 0, Go within 3 seconds

it is the bv6 26.When ienter11111 in the mastercode menu it just comes up 'pincode error'.D. 

Oh

Have you tried the 22" method?

the 11111 code is from the 26" service manual.

Have now-that worked a treat-its definately the 26" in case you thought i,m being a chump!The service counter came up

   audio(days)212

  Boot counter 109

  Video(days)745

on(T*10)507

What Does this mean? Thanks for your help,Danny 

These service counters will add up the hours the set has been in use, and give the results in days. Your set was turned on 507 x 10 times, and has been used for audio only (screen off) for a total of 212 days and for video for a total of 745 days. If you add audio & video time, it's been turned on for a total of 2.6 years. Pretty high milage.

Roger

Thanks Roger,that makes sense-good job i only gave £250 for it! Danny