Dear all,

Is it possible to connect the BS5 to a BV7, speakers connected to BV7, and still have audio from the speakers without having to push PC on the Beo4? I used to have a BS3200 connected to the system as well and then there was no problem at all. Now there is is no audio unless I activate the PC function of the BV7. BS5 is registered as audio master and BV7 as videomaster with speakers connected (can't remember which option).

Problem will be solved once I get the chance to connect the entire system again but for now it would be great if I could get audio from the speakers without pressing PC since that means I will get a picture on the screen as well. 

If your BS5 is set to audiomaster and A.OPT 0, the BV7 to V.OPT 2 it should work pressing N.MUSIC or N.RADIO. Should even work with a BS3200 connected if your BS5 is set to NO AUDIOMASTER - works in my setup with BS9000.

Hope this helps.

Stefan

...and it works like a charm. Many thanks for your assistance.

/Emil

You `re welcome - enjoy.

Stefan

You should also be able to set the BeoSound 5 to react to CD and RADIO, in this way you don't need to press LIST first.

/MikaelB

MikaelB:

You should also be able to set the BeoSound 5 to react to CD and RADIO, in this way you don't need to press LIST first.

/MikaelB

If I remember correctly, You have to set the BeoSound to Audiomaster before you can configure CD and Radio to replace N.Music and N.Radio.