Hi all,

I am setting up a beocenter 2 with a beo4. When I push down any key from the remote controler, there is no reaction in the beocenter. Is there any action to do to initialize the communication between the beocenter and the beo4?

Thank for your help.

 

Joel 

Suspect wrong option settings in Beocenter 2

On Beo4, press standby and list together

then list until Beo4 reads Option? Press Go

then list until Beo4 reads AOpt

then 1

Standby on Beocenter 2 should blink and Beo4 should now work.

Good luck!

It will be set to Option 0 . You need to set it to option 1 or 2 depending on your set up. Not at home but I think it is List and red button together, use the List button to scroll to Option? and then choose Audio and then 1. Much easier with a Beolink 1000!! Sound 1 store!

Hello Peter and Graham,

 I tried what you just suggested me and now it works. Thank you very much for your help. This was my first post on this forum. Thank you...

 
Joël
 

Hi Joel, Glad we could help and welcome to BeoWorld.