ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
Hi,
Quick question: How thick is a Masterlink cable?
I'm going to buy some cable ducts and want to make sure they are big enough!
Magnus
Magnus,
Standard B&O Masterlink cable part Number 6250422 is 7mm dia
The internal wires are 24 AWG size
Regards Keith....
BeoVision 8-40 / BeoVision 8-32 / Beovision 6-26 / BeoSound 3200 / BeoSound 1 / BeoLab 3 / Beolab 6000 / Beolab 2000 / Beoport / Beomedia 1 / 3* Beo4 /BeoCom 5 with VOIP
Thanks a lot Keith!
And I agree about Cat7, but this is a relative short run so Masterlink is easier. But if I'm going to do some longer runs, I'll use Cat7! Thanks for the tip!