in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 02-15-2011 1:15 PM by ........... 15 replies.
Page 1 of 1 (16 items)
Sort Posts: Previous Next
  • 02-09-2011 3:24 PM

    Unusual request...

    Hi fellow Beoworlders,

    I have a slightly unusual request, and I'm hoping someone can help me..

    I have an ST500 stand for an Overture. A picture is attached. My stand is missing the bit that sticks up on the top that stops your system from falling off if it gets knocked.

    I contacted B&O, but there is no spare part available. If someone else has one of these stands, could they possibly measure the size if this 'bit' so that I can make one myself. I just need the width and the height it sticks out.

    I'm guessing I could make one with a bit of dowel or similair?

    Any help would be much appreciated!

    Jonathan


    My B&O: 2009 Catalogue and Pricelist

  • 02-09-2011 3:42 PM In reply to

    Re: Unusual request...

    The hole should be there ain't it, so you can measure the diameter. The length is pretty obvious as it sticks out for about 20mm?Smile 

    B&O item 1, B&O item 2, B&O item 3,...................B&O item 735

    Beovirus? What's that?

  • 02-09-2011 3:45 PM In reply to

    Re: Unusual request...

    Can you not measure the depth and diameter of the hole in the underside of the Beosound/center??

    Regards Graham

  • 02-09-2011 3:51 PM In reply to

    Re: Unusual request...

    I can, but it's more the length above that I need... If it's too short, the system may still topple over. If it's too long the system may not sit flush..

    I'd rather do it right the first time!!

    My B&O: 2009 Catalogue and Pricelist

  • 02-09-2011 4:18 PM In reply to

    • stotty1111
    • Top 75 Contributor
      Male
    • Joined on 12-16-2007
    • UK / France - Nth Worcestershire/Finistere
    • Posts 924
    • Gold Member

    Re: Unusual request...

    I produced one from a uk radiator bleed tool - it was the correct diam and had a horizontal bar which needed shortening slightly - the length was also adjusted and eventually mounted on an mxstand - think i mail you pics, the ouveture is the mountedat about 45' to the fronyt edgw and the rotated to line up, the spiggot prevents the ouverture from being dislodged

    If my workshop was up and running I'd make and send you one however currently thats another story

    tony 

    I always try to operate using/following the KISS principle --  Keep it simple stupid!

  • 02-09-2011 7:52 PM In reply to

    Re: Unusual request...

    Leslie:

    The hole should be there ain't it, so you can measure the diameter. The length is pretty obvious as it sticks out for about 20mm?Smile 

     

    It looks a lot more than 20mm...

    Am I the only one here who has one??? I know I could measure holes, but I'd rather have the actual measurement of the piece itself..

    My B&O: 2009 Catalogue and Pricelist

  • 02-10-2011 4:17 AM In reply to

    • majand
    • Not Ranked
    • Joined on 02-26-2008
    • Helsinki
    • Posts 72
    • Gold Member

    Re: Unusual request...

    jldmelb:

    Leslie:

    The hole should be there ain't it, so you can measure the diameter. The length is pretty obvious as it sticks out for about 20mm?Smile 

     

     

    It looks a lot more than 20mm...

    Am I the only one here who has one??? I know I could measure holes, but I'd rather have the actual measurement of the piece itself..

    I have the thingy at home. I'll try to remember to measure it tonight.

     

    Pekka

  • 02-10-2011 4:29 AM In reply to

    Re: Unusual request...

    I'll call my brother and ask if he can measure the one he's got.

    -Andreas

     

    BLab5, BLab5000, BLab8000, BV10, BS9000, BS3, Beo5, Beo4, BLink1000, BLink5000, BLink7000, A2, A8, Form2

     

     

     

  • 02-10-2011 4:33 AM In reply to

    Re: Unusual request...

    It's 37mm tall with a diameter of about 10mm.

    -Andreas

     

    BLab5, BLab5000, BLab8000, BV10, BS9000, BS3, Beo5, Beo4, BLink1000, BLink5000, BLink7000, A2, A8, Form2

     

     

     

  • 02-10-2011 5:30 AM In reply to

    Re: Unusual request...

    Hi there - I have one of these left over from a BS3000 pole stand which had been used in conjunction with an STB BS4 conversion. 

    Being the squirrel that I am, I kept the top plate including locating lug which I am sure is the same part as above. 

    It's yours if you send me your address....

    HTH

    Llewelyn

  • 02-10-2011 7:20 AM In reply to

    Re: Unusual request...

    Use part no 2993045 from the pole style stand, this should help!

  • 02-13-2011 6:22 PM In reply to

    Re: Unusual request...

    Llewelyn:

    Hi there - I have one of these left over from a BS3000 pole stand which had been used in conjunction with an STB BS4 conversion. 

    Being the squirrel that I am, I kept the top plate including locating lug which I am sure is the same part as above. 

    It's yours if you send me your address....

    HTH

    Llewelyn

     

    Thanks for your offer! I sent you an email..

    My B&O: 2009 Catalogue and Pricelist

  • 02-13-2011 6:23 PM In reply to

    Re: Unusual request...

    Thanks very much for all of your responses and generous offers!

    Beoworld is the greatest!!

    My B&O: 2009 Catalogue and Pricelist

  • 02-14-2011 8:30 AM In reply to

    Re: Unusual request...

    does this help?


    BS1 x 2, BS 3, BS4, BS2000 x 3, BS2300, BS4000, BS9000, BL4, BL 4000 x 2, BL8000 x 2, BL2500 x 2, BL2000, Beocom 2, Beocom 6000 x 4, Beocom 1401 x 4, Beocom 1600 x 2, Beocom 2500 x 4, Beotalk 1200, A9 Keyring, Beo4 x 8, Beotime, Bottle Opener

    2011 Wish List: BL3500, BL6000, BL5, BL9, active link, BS5, Beo5

  • 02-14-2011 8:32 AM In reply to

    Re: Unusual request...

    here's another from the top


    BS1 x 2, BS 3, BS4, BS2000 x 3, BS2300, BS4000, BS9000, BL4, BL 4000 x 2, BL8000 x 2, BL2500 x 2, BL2000, Beocom 2, Beocom 6000 x 4, Beocom 1401 x 4, Beocom 1600 x 2, Beocom 2500 x 4, Beotalk 1200, A9 Keyring, Beo4 x 8, Beotime, Bottle Opener

    2011 Wish List: BL3500, BL6000, BL5, BL9, active link, BS5, Beo5

  • 02-15-2011 1:15 PM In reply to

    Re: Unusual request...

    Hi Jonathan

    Just to let you know I haven't received any emails from you re the above yet - Try resending or messaging me on here if you like?

    Cheers

    Llewelyn

Page 1 of 1 (16 items)