Hi all,

being able to install both, the BeoCenter2 as well as the BeoSound 9000 at home my BeoDealer told me that it is not possible to install 2 audiomaster in one masterlink installation. But he told that they are going to search for a solution.

As I do not want to store or sell one of both devices I am searching for a possibility to install both in one masterlink. Might it be possible to

- customize the BeoCenter2 in a way that it does not react on the CD specific commands

- use a BEO5 /6 to switch scenarios a) BeoCenter2 active, b) BeoSound 9000 active

- ...

Thank you for any hint or suggestion.

Cheers,

Hi

It IS possible to have both of these units in the same Masterlink set up, assuming that they are in different rooms. What is NOT possible is to configure them both as the audio master.

One can be in option1 and feed the main room and the link system.

The other can be in option4 and its sources are only available in the link room. It is still possible to access sources from the main room audio master.

Option4 is only available to products above a certain software level.

Regards

Opman

Just has another thought.

You may be able to place BeoCenter2 in the main room was well as BeoSound9000 but not connect Masterlink to the socket box. By connecting a scart lead to the television you could simply use BeoCenter2 as a DVD player. This way there wouldn't be an option programme clash. Although it would be a fairly expensive SD DVD player.

Opman

Hi Opman,

Thank you very much for the fast reply. Sounds like I am going for a super stylish DVD Player

Cheers,

Or, you could (like I do) only have the one you want to use powered on at any one time.............

Not ideal but works perfectly! :-)