in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 03-19-2011 10:28 PM by Hildebrand. 9 replies.
Page 1 of 1 (10 items)
Sort Posts: Previous Next
  • 11-25-2010 3:12 AM

    • carlito
    • Top 500 Contributor
    • Joined on 04-19-2007
    • Switzerland
    • Posts 97
    • Silver Member

    Software Update Beolab 3500 - Which Part number?

    One of my Beolab 3500 is showing A-TAPE2 instead of N-MUSIC

    Which part number is the PCB Board? I could not find anythink with searching the forum.

    Thank's for quick help

    Carlo

  • 11-25-2010 5:17 PM In reply to

    • LC
    • Not Ranked
      Male
    • Joined on 11-23-2010
    • London
    • Posts 24
    • Silver Member

    Re: Software Update Beolab 3500 - Which Part number?

    version 2.1 changed the display names to n.music/n.radio

    you can do this by replacing microcomputer PCB36, part no.: 8006009
    or now there is sw 3.3 which allows it to support the a.aux command and ml gateway compatible!
    you have to Exchange the uP module PCB36, part no: 8002944.
    i pressume it will be better to go with the later one i believe its compatible as long as your beolab 3500 has an ML socket.
    Louis
  • 01-06-2011 7:11 AM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    Can someone (Keith saunders perhaps) check this part number please. If it is the case, then his guide should be updated. 

    Btw cost for the 8006009 is now apx £43 inc vat. 

     

    Beocentre 6-26, DVD1, beolab 3500, beocom4, beotalk 1100.

     

  • 01-06-2011 3:12 PM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    You may wish to look at the FAQ HERE

    Regards Keith....

  • 01-06-2011 4:00 PM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

     

    Hi Keith

    Yes, that is the guide, and very useful it is too - thank you.

    My question was in reference to the previous post - has the sw version changed to 3.3 with this latest pcb, and is it applicable for all versions of the beolab 3500, or just the later ones?

    Louis:

    version 2.1 changed the display names to n.music/n.radio

    you can do this by replacing microcomputer PCB36, part no.: 8006009
    or now there is sw 3.3 which allows it to support the a.aux command and ml gateway compatible!
    you have to Exchange the uP module PCB36, part no: 8002944.
    i pressume it will be better to go with the later one i believe its compatible as long as your beolab 3500 has an ML socket.
    Louis

     

     

    Beocentre 6-26, DVD1, beolab 3500, beocom4, beotalk 1100.

     

  • 01-10-2011 5:47 AM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    The latest version of Beolab 3500 software is 3.33

    When you upgrade a Beolab 3500 Mark 1 to version 2.1 as defined in the FAQ it changes the display as follows:-

    A.TAPE      -> A.MEM
    A.TAPE2    -> N.MUSIC
    V.TAPE      -> V.MEM
    V.TAPE2    -> DVD2
    CDV          -> DVD
    PHONO     -> N.RADIO
    SAT           -> DTV

    The part number for updating the software by replacing the micro processor PCB36 to 2.1 is 8006009

    You could update your Beolab 3500 to version 3.33 by using part number 8002944 but would provide no benefit unless your unit was a Mark II version and you plan to use wireless.

    Updates after 2.1 to 3.33 provide Master Link Gateway compatible and A.AUX command is now possible. Version 3.1 provided wireless compatibility.

    Regards Keith....

  • 01-10-2011 8:37 AM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    Thank you for your reply and explanation Keith.

     

     

    Beocentre 6-26, DVD1, beolab 3500, beocom4, beotalk 1100.

     

  • 01-11-2011 7:50 AM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    Does any of this apply to the beolab 5000 panels as well?

  • 01-11-2011 8:03 AM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    The short answer is NO

    The Beolab 5000 are powerlink speakers and the Beolab 3500 is a link room speaker meaning it uses a Masterlink connection.

    Regards Keith....

  • 03-19-2011 10:28 PM In reply to

    Re: Software Update Beolab 3500 - Which Part number?

    Greetings all, so just to clarify.  Notice Louis mentioned you can update your earlier BL3500 as long as it has ML.

    Then Keith mentioned that you can update your BL3500 to SW3.33 but would provide no bebfit unliess your unit was a Mk2 version and you plan to use wireless.  Did you say an Mk2 version because of the ML socket or is there more to it then that?

    Seeing that I have a older BL3500 yet it has both MCL and ML sockets would I get the full benefit of going to SW3.1 or 3.33?

    Regards,

    Hiller

     

    BeoVision 4-50 MkII, BeoSystem 1, Zektor Switch, DTS box, BeoLink Passive, BeoVox Cona, BeoLab 1, BeoLab 3500, BeoLab 6000, BeoLab 4000, BeoLab 4, BeoLab 3000, BeoMedia 1, BeoMaster 5, BeoSystem 3 Type 9621

Page 1 of 1 (10 items)