in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Signal splitter for PowerLink.
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 10-30-2010 1:48 PM by Bentleyman. 1 replies.
Page 1 of 1 (2 items)
Sort Posts: Previous Next

  • 10-30-2010 12:55 PM

    • pavur
    • Not Ranked
    • Joined on 10-20-2010
    • Posts 4
    • Bronze Member

    Signal splitter for PowerLink.

    signal_splitter.jpg
    Reply Contact

    Hello,

    I would like to ask some guy which is expert in electronic area for sketch of signal splitter (joining of signals) for PowerLink.

    Reason is I want to use two sources of PowerLink signals to one speaker. I know that normaly it solved by MasterLink connection but It will be so dificult for me to put to the walls new cable.

    I found on internet this sketch of splitter see attached picture please, but I don't know if I can use it also for PowerLink.
    Thanks a lot.

    BR Pavur

  • 10-30-2010 1:48 PM In reply to

    Re: Signal splitter for PowerLink.

    Reply Contact

    I have absolutely no idea Pavur - but you may want to speak to Steve at Sounds Heavenly...

    http://soundsheavenly.co.uk/contact.htm

     

    Michael

    BV5, BV Avant, MX4000, MX1500

    BS 7000, BS 5500

    Penta III, Penta II, BL 4000, RL 60.2,  RL 35, CX-100 Alu

    BL 7000, MCP6500, MCP5500,  BL 5000,  Beo4 (x2), BL 1000 (x2)
Page 1 of 1 (2 items)