in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 06-29-2007 4:53 AM by BEOfreak. 6 replies.
Page 1 of 1 (7 items)
Sort Posts: Previous Next
  • 06-29-2007 1:43 AM

    • BEOfreak
    • Not Ranked
      Male
    • Joined on 04-17-2007
    • Odense, Denmark
    • Posts 63
    • Founder

    Lintronic and scart

    Is there a way to connect a Lintronic unit to the control signal in the scart socket so you can control your non B&O equipment from a linkroom?

    BEOfreak

     

    Avant CTV 28", V6000, DVD1, BC9000, BS3000, BL4000, MX4200, CX50, BeoCom 2, Beocom 6000, LC1, LC2

  • 06-29-2007 1:58 AM In reply to

    • Kevin
    • Top 50 Contributor
    • Joined on 02-15-2007
    • Moderator
    • Posts 1,256
    • Founder

    Re: Lintronic and scart

    The best person to answer that is Michael at Lintronic who is very helpful. Check out his website.

     

    cheers,

    Kevin 

  • 06-29-2007 2:06 AM In reply to

    Re: Lintronic and scart

    Not sure about your question because it assumes that you want to run a long SCART cable from a link room which you should not do.

    Lintronic can control a link room because it has an RS232 interface cable which can link units together.

    Regards Keith....

  • 06-29-2007 3:36 AM In reply to

    • BEOfreak
    • Not Ranked
      Male
    • Joined on 04-17-2007
    • Odense, Denmark
    • Posts 63
    • Founder

    Re: Lintronic and scart

    As far as i understand, the Lintronic unit require a IR input signal (and then translate it to a non B&O IR signal). When I press DVD in a linkroom, the signal is transmittet via masterlink to my Avant (in the masteroom) and then to the Avants scart socket where it normaly will control a DVD (via the scart cable). I want to be able to control a non-B&O DVD/HDR from a linkroom. A solution could be a DVD-controller or One-remote, but the Lintronic unit is more flexible.

    Best regards
    BEOfreak

    Avant CTV 28", V6000, DVD1, BC9000, BS3000, BL4000, MX4200, CX50, BeoCom 2, Beocom 6000, LC1, LC2

  • 06-29-2007 4:28 AM In reply to

    • seheiste
    • Not Ranked
    • Joined on 04-21-2007
    • Stockholm
    • Posts 27
    • Bronze Member

    Re: Lintronic and scart

    Hi,

    this could be a solution.

    http://shop.oneremote.dk/catalog/

    /Heinz

  • 06-29-2007 4:50 AM In reply to

    • BEOfreak
    • Not Ranked
      Male
    • Joined on 04-17-2007
    • Odense, Denmark
    • Posts 63
    • Founder

    Re: Lintronic and scart

    Hi Heinz,

    I have looked at the oneremote solution, but I want it to be more flexible (I want to define which botten does what) like Lintronic.

    Best regards
    BEOfreak

    Avant CTV 28", V6000, DVD1, BC9000, BS3000, BL4000, MX4200, CX50, BeoCom 2, Beocom 6000, LC1, LC2

  • 06-29-2007 4:53 AM In reply to

    • BEOfreak
    • Not Ranked
      Male
    • Joined on 04-17-2007
    • Odense, Denmark
    • Posts 63
    • Founder

    Re: Lintronic and scart

    Thanks Kevin, I'll try Michael directly.

    Best regards
    BEOfreak

    Avant CTV 28", V6000, DVD1, BC9000, BS3000, BL4000, MX4200, CX50, BeoCom 2, Beocom 6000, LC1, LC2

Page 1 of 1 (7 items)