in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012


Latest post 08-30-2010 9:26 PM by SWISS_2. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next
  • 08-30-2010 1:28 PM

    Sketches BV 10 & BL 8000 & BL 11 Wall mounting

    I would need the sketches for wall mounting the BV 10-46, BL 8000 & BL 11 so that I know where to make the cable outlets from the wall so that you won't see any cables when it's finished and should then look like this: Smile



  • 08-30-2010 1:34 PM In reply to

    Re: Sketches BV 10 & BL 8000 & BL 11 Wall mounting

    And the BL 11 should then look like this: Smile



  • 08-30-2010 9:26 PM In reply to

    • SWISS_2
    • Top 150 Contributor
    • Joined on 04-16-2007
    • Neuchatel, Suisse
    • Posts 552
    • Gold Member

    Re: Sketches BV 10 & BL 8000 & BL 11 Wall mounting


    You provide a nice, minimalist, well-organized photo concept.

    There are sample illustrations in the BV-10 operation manual, available to Beoworld Gold members.  However, without more specifics, a few questions arise:

    1. What is your actual wall construction ?

    2. Distance between speakers and BV-10 ?   Same with the subwoofer ?

    3. Distance to mains/electrical supply ?

    4. Distance to additional  B&O or other stereo system,  cable, SAT TV, or  HTPC components ?  Are you also planning to M-L link the system into other rooms ?

    If helpful, I ran a horizontal conduit under the BV-10 to the BL 4000 active speakers we use. This is silicone conduit which facilitates easy cable pulling and no snags. Our location is masonry, not easy but at least to code.

Page 1 of 1 (3 items)