|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 02-19-2011 12:32 PM by sensotronic. 9 replies.
-
07-04-2010 7:01 AM
|
|
-
-
-
Razlaw
- Joined on 04-24-2007
- Illinois
- Posts 1,770
|
Any other thoughts on this? I am considering adding a Beosound 9000 to my system. Dealer tells me that I could not make the 9000 the audiomaster as long as a 3000 is in the system. Reason given is that the 3000 does not have the software to function as a local source.
Beovision 7-55 with Beolab 7-4, 9s and 4000s
Beovision 10-40 with Beolab 1s and 6000s
Beosound 1, 5, 2000, and 3000
Beotime, Beotalk, Beocoms
|
|
-
-
Razlaw
- Joined on 04-24-2007
- Illinois
- Posts 1,770
|
Beovision 7-55 with Beolab 7-4, 9s and 4000s
Beovision 10-40 with Beolab 1s and 6000s
Beosound 1, 5, 2000, and 3000
Beotime, Beotalk, Beocoms
|
|
-
-
Teletom
- Joined on 05-09-2007
- the Netherlands
- Posts 111
|
Razlaw:
Any other thoughts on this? I am considering adding a Beosound 9000 to my system. Dealer tells me that I could not make the 9000 the audiomaster as long as a 3000 is in the system. Reason given is that the 3000 does not have the software to function as a local source.
In the BS3000 Option 5 and 6 have been introduced in Sw version 3.4, starting from serialnumber 17511872. Most probably you have an earlier version.
Teletom
|
|
-
-
Razlaw
- Joined on 04-24-2007
- Illinois
- Posts 1,770
|
Thanks! My dealer is telling me that it does not matter what software the 3000 has, that the 3000 can never be used as a local source and that there is no software version that will allow it to be used as a local source. If I am understanding what you are saying option 5 or 6 would allow it to function as a local source, if my Beosound 3000 allows those options to be set?
Beovision 7-55 with Beolab 7-4, 9s and 4000s
Beovision 10-40 with Beolab 1s and 6000s
Beosound 1, 5, 2000, and 3000
Beotime, Beotalk, Beocoms
|
|
-
-
Carolpa
- Joined on 08-15-2008
- Posts 440
|
Razlaw: My dealer is telling me that it does not matter what software the 3000 has, that the 3000 can never be used as a local source and that there is no software version that will allow it to be used as a local source.
your dealer isn't informed correctly!
It depends on the combination serialnumber (must be > as described) and the sw version.
If both apply you can use the BS3000 as a local source.
|
|
-
-
stefan
- Joined on 04-16-2007
- 200 miles from Struer
- Posts 1,733
|
Razlaw:
Thanks! My dealer is telling me that it does not matter what software the 3000 has, that the 3000 can never be used as a local source and that there is no software version that will allow it to be used as a local source. If I am understanding what you are saying option 5 or 6 would allow it to function as a local source, if my Beosound 3000 allows those options to be set?
Your dealer is definately wrong! Did you try A.OPT 5 (or 6) ? The stdby LED will flash to confirm the option programming. Now you can control your BS3000 as a local source, only in the linkroom, and you can access your main room audio sources (A.OPT 5) or your audio- and video sources (A.OPT 6). If I remember correctly BS3000s with small clamper are the earlier ones - to be upgraded - and for the later ones with large clamper the link room options should work.
Stefan
|
|
-
-
Razlaw
- Joined on 04-24-2007
- Illinois
- Posts 1,770
|
Dealer has done some more checking and does think it will work, although my Beosound 3000 needs a an updated chip. I do not currently have Option 5 and 6. 3000 going in for update Monday.
Beovision 7-55 with Beolab 7-4, 9s and 4000s
Beovision 10-40 with Beolab 1s and 6000s
Beosound 1, 5, 2000, and 3000
Beotime, Beotalk, Beocoms
|
|
-
-
sensotronic
- Joined on 04-30-2009
- Posts 72
|
it does work, both BS3000 need to be on the software level that has N.Music and N.Radio, then put one into option 0 as this is the master, the other one disconnect from the masterlink plug in speakers and then option it to A.Opt 6, then switch off and connect to ML and power up
So I now have 1 BS3000 master and 1 as a slave
JON
|
|
Page 1 of 1 (10 items)
|
|
|