in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 06-22-2010 9:14 PM by Hacoi. 6 replies.
Page 1 of 1 (7 items)
Sort Posts: Previous Next
  • 06-15-2010 3:31 AM

    • Hacoi
    • Not Ranked
    • Joined on 06-15-2010
    • Vietnam
    • Posts 13
    • Bronze Member

    Radio in beomaster 6500??

     Radio in Beomaster 6500, does not remember their station after store, ask for your help see why. Thanks

  • 06-15-2010 10:53 AM In reply to

    • Dillen
    • Top 10 Contributor
    • Joined on 02-14-2007
    • Copenhagen / Denmark
    • Posts 5,008
    • Founder

    Re: Radio in beomaster 6500??

    There's a lithium cell (battery) inside the processor casing that holds the info in the memory.
    It's soldered in and the module must be handled in anti-static environment.
    Best replaced by a trained tech guy but shouldn't be an expensive repair.

    Martin

  • 06-15-2010 8:54 PM In reply to

    • Hacoi
    • Not Ranked
    • Joined on 06-15-2010
    • Vietnam
    • Posts 13
    • Bronze Member

    Re: Radio in beomaster 6500??

    OK, thanks U very much

  • 06-22-2010 10:40 AM In reply to

    • Hacoi
    • Not Ranked
    • Joined on 06-15-2010
    • Vietnam
    • Posts 13
    • Bronze Member

    Re: Radio in beomaster 6500??

    Hi Martin!
    I opened beomaster 6500 but did not find lithium cell (battery) inside, you can specify it fears me where on my picture below to replace the lithium cell.
    Thanks U so much
    Hacoi

  • 06-22-2010 4:22 PM In reply to

    Re: Radio in beomaster 6500??

    check the microprocessor board ... vertically mounted at the front ... shielded front and back

     

    neil

  • 06-22-2010 4:45 PM In reply to

    • Dillen
    • Top 10 Contributor
    • Joined on 02-14-2007
    • Copenhagen / Denmark
    • Posts 5,008
    • Founder

    Re: Radio in beomaster 6500??

    Inside the processor metal shielding and soldered to the board.
    Actually to be opened only by a trained tech guy in antistatic environment.
    Remember to reset the NVRAM after replacing the cell.

    Martin

  • 06-22-2010 9:14 PM In reply to

    • Hacoi
    • Not Ranked
    • Joined on 06-15-2010
    • Vietnam
    • Posts 13
    • Bronze Member

    Re: Radio in beomaster 6500??

    Hi Martin and neil !

    You can be mapped and guidance on how to open photos instead of me?

    Thanks you,

    Sincerely.

Page 1 of 1 (7 items)