|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 10-25-2009 4:35 AM by kallasr. 13 replies.
-
10-16-2009 3:15 PM
|
|
-
Gordon38
- Joined on 01-22-2009
- Denmark
- Posts 21
|
MX-4002 and passive speaker via MCL 2P
Just bought an old MCL 2P to be used with MX-4002 in my garage.. MCL 2P connected to MX-4002 via powerlink.. Turned on PL-socket in menu.. but no sound
MCL 2P has a red light - will this change to another color when in use? Could it be my cable? only connected 1 cable to socket 1 (think it is a standard power link cable from my BL 4000)
Any ideas what could be wrong?
Thanks..
|
|
-
-
AdiS
- Joined on 07-24-2007
- Posts 196
|
Re: MX-4002 and passive speaker via MCL 2P
Hello Gordon,
you don´t need the MCL 2P - the MX 4002 - as well as the MX 4000 - has two speaker sockets for passive speakers on the backside! So you can directly connect your passive speakers!
regards, Adrian
|
|
-
-
stotty1111
- Joined on 12-16-2007
- UK / France - Nth Worcestershire/Finistere
- Posts 924
|
Re: MX-4002 and passive speaker via MCL 2P
try switching tv off then on - the 2p light should change to green and the speakers boot up!
good luck
tony
I always try to operate using/following the KISS principle -- Keep it simple stupid!
|
|
-
-
Gordon38
- Joined on 01-22-2009
- Denmark
- Posts 21
|
Re: MX-4002 and passive speaker via MCL 2P
Speakers directly connected to MX-4002 works fine, but I would like to turn off the tv speaker..
Tried to turn on/off several times :-(
Any ideas on the cabeling? I can'y connect a powerlink cable wrong?? can I?
|
|
-
-
AdiS
- Joined on 07-24-2007
- Posts 196
|
Re: MX-4002 and passive speaker via MCL 2P
is it a full wired powerlink-cable?
|
|
-
-
Gordon38
- Joined on 01-22-2009
- Denmark
- Posts 21
|
Re: MX-4002 and passive speaker via MCL 2P
hmm.. don't know..
Tried 2 cables so far:
8 pins - nothing works
5 pins (aux cable) - makes light go green on MCL 2P when TV turned on, but gives no sound..
What kind of powerlink cable should I buy?
|
|
-
-
kallasr
- Joined on 04-19-2007
- Willich, NRW, Germany
- Posts 1,077
|
Re: MX-4002 and passive speaker via MCL 2P
Had the same problem (MCL 2P would not turn on). This cable solved my problem.
Ralf
My Beo: Beosound 3000, Beolab 4000, Beo 4 DVD, Beolab 5000/Beomaster 5000, Beovox S45.2 with Stands, Beosystem 7000 black with Beolink 7000, Beolink 1000, F1000 (3 cubes), Beovox 5000, Beovox 3000, Attyca 1.
|
|
-
-
Spiros
- Joined on 09-03-2007
- Thessaloniki GREECE
- Posts 1,088
|
Re: MX-4002 and passive speaker via MCL 2P
Gordon38:
Speakers directly connected to MX-4002 works fine, but I would like to turn off the tv speaker..
Tried to turn on/off several times :-(
Any ideas on the cabeling? I can'y connect a powerlink cable wrong?? can I?
If I'm not mistaken you can choose to go for speaker 1,2,3 which means you can choose which sourse of speakers you want to listen to.
I alreade have one MX4002 my self but only use a pair of passive on to listen to.
I doubt if I would be using an MCL2P on it. From my point of view it just doesn't make any sence.
|
|
-
-
kallasr
- Joined on 04-19-2007
- Willich, NRW, Germany
- Posts 1,077
|
Re: MX-4002 and passive speaker via MCL 2P
If have a set of beovox 3000 connected to my mx4000 (testing this setup) - no sound from the tv, just the speakers.
No mcl2p needed...
Ralf
My Beo: Beosound 3000, Beolab 4000, Beo 4 DVD, Beolab 5000/Beomaster 5000, Beovox S45.2 with Stands, Beosystem 7000 black with Beolink 7000, Beolink 1000, F1000 (3 cubes), Beovox 5000, Beovox 3000, Attyca 1.
|
|
-
-
tournedos
- Joined on 12-08-2007
- Finland
- Posts 5,808
|
Re: MX-4002 and passive speaker via MCL 2P
kallasr:
If have a set of beovox 3000 connected to my mx4000 (testing this setup) - no sound from the tv, just the speakers.
How did you manage that...? From what I know looking at the schematics (and in practice with my MX6000), there are no switches or switching between the external and internal speakers. They are connected directly in parallel. A headphone plugged in would mute them both, though.
Do your internal speakers work at all if you unplug the 3000's?
|
|
-
-
kallasr
- Joined on 04-19-2007
- Willich, NRW, Germany
- Posts 1,077
|
Re: MX-4002 and passive speaker via MCL 2P
I will test tonight.
Ralf
My Beo: Beosound 3000, Beolab 4000, Beo 4 DVD, Beolab 5000/Beomaster 5000, Beovox S45.2 with Stands, Beosystem 7000 black with Beolink 7000, Beolink 1000, F1000 (3 cubes), Beovox 5000, Beovox 3000, Attyca 1.
|
|
-
-
Gordon38
- Joined on 01-22-2009
- Denmark
- Posts 21
|
Re: MX-4002 and passive speaker via MCL 2P
Picked up a PowerLink Mk2 cable from Beostore today.. no success
Powers up nice (green light turns on) but no sound.. How can I tell if the line output is damaged/not working? is there a circuit somewhere?
|
|
-
-
stotty1111
- Joined on 12-16-2007
- UK / France - Nth Worcestershire/Finistere
- Posts 924
|
Re: MX-4002 and passive speaker via MCL 2P
are you silver or gold member? if so there is a circuit diagram in the manuals / service area that you can download ie on the mainsite product section
t
I always try to operate using/following the KISS principle -- Keep it simple stupid!
|
|
-
-
kallasr
- Joined on 04-19-2007
- Willich, NRW, Germany
- Posts 1,077
|
Re: MX-4002 and passive speaker via MCL 2P
tournedos:
kallasr:
If have a set of beovox 3000 connected to my mx4000 (testing this setup) - no sound from the tv, just the speakers.
How did you manage that...? From what I know looking at the schematics (and in practice with my MX6000), there are no switches or switching between the external and internal speakers. They are connected directly in parallel. A headphone plugged in would mute them both, though.
Do your internal speakers work at all if you unplug the 3000's?
I was wrong, sound from the center (TV) as well. This changes only with Powerlink in use (now I upgraded to Beolab 4500). Getting closer to the final setup...BC 9300, BL4500, Beovision MX4000...just waiting for a long Aux Cable from Steve.
Ralf
My Beo: Beosound 3000, Beolab 4000, Beo 4 DVD, Beolab 5000/Beomaster 5000, Beovox S45.2 with Stands, Beosystem 7000 black with Beolink 7000, Beolink 1000, F1000 (3 cubes), Beovox 5000, Beovox 3000, Attyca 1.
|
|
Page 1 of 1 (14 items)
|
|
|