in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012


Latest post 08-18-2009 4:06 PM by Xseries. 2 replies.
Page 1 of 1 (3 items)
Sort Posts: Previous Next
  • 08-18-2009 2:15 PM

    Beosystem 6500 "No Contact"

    Hi, my Beosystem 6500 displays "no contact" on the master control panel when ever I use the remote control, I have replaced the batteries in the remote but cannot get the remote to work. all items on the system work if operated manually, is there a reset or setup configuration needed as I cannot find anything in the manual about this message.

    Any information would be greatfully received.



  • 08-18-2009 3:25 PM In reply to

    • YannChris
    • Top 200 Contributor
    • Joined on 04-16-2007
    • Larmor-Plage, France
    • Posts 276
    • Founder

    Re: Beosystem 6500 "No Contact"


    This happens sometimes with Beolink 5000 when it is set as a one-way remote.

    Maybe you have the same option on the MCP.


    Ne pas s'en faire et boire frais!

    Mon install en images: cliquez sur mon profil, au dessus de mon avatar - Puis "My files" tout en bas.

    Pictures of my setup: click on my nickname, above my avatar. Then "my files" at the bottom of the page.

  • 08-18-2009 4:06 PM In reply to

    • Xseries
    • Top 150 Contributor
    • Joined on 04-16-2007
    • Hampshire
    • Posts 433
    • Bronze Member

    Re: Beosystem 6500 "No Contact"

    There is no option on the MCP for 1 way remote.  Try switching the unit off at the mains  - wait a couple of minutes and reconnect.

    Have you any other equipment (eg TVs etc) that you might have programmed by accident that may have caused the option numbers to change?



Page 1 of 1 (3 items)