I use the 9000 for music and the Ouverture (connected to my non B&O television and BL6000 speakers) for movies. The two systems are not masterlinked. Is there a way to avoid turning both on at the same time with the Beo4 remote? I use the 9000 more than the Ouverture. Something about changing options?

Thanks

Difficult!!!

You have to set them both on option 5 but the point is that they will both switch on and off everytime you press e.g. Radio or any other command!!!

Still I cannot understand why you need both in the same room!!

Try A.OPT 1 (or2) for the Ouverture and A.OPT4 for BS9000. You have to press LINK before source, for example you want to activate BS9000 CD press LINK - CD. Ouverture won`t resond. Same thing vice versa. Hope this helps.

Stefan

Hi, I have the same issue, Beosound 9000 for CD's etc and a Beosystem 5500 for LP's and tapes etc, although it also has a CD....

Will this work in that setup as well?

Cheers

GUY

...why not? Take care that only the audiomaster you want to set the option to can "see" your remote. Disconnect the other one from the mains.

Stefan