I have an Overture with Beolab 4000 & 6000. 6000's are in the lounge (large room with vaulted ceiling) and the 4000's are in the dining room (a smaller room with beamed ceilings). With full system operating the bass & volume from the 4000's is far too much, can I control these seperately. My link to these is the 4 wire powerlink and will be difficult to change.

Firstly welcome to Beoworld. Your best option would be a Beolink Active. This would give you full control of the Overture from the other room(Your post does not say which room the Overture is in) and also let you control the volume of each room. You will need to run  a master link connection beween the two rooms.

Craig

You need to install a Beolink Active in the dining room connected to the Ouverture with ML cable. Connect the speakers to the Active to have independent control of volume and tone settings in that room.

S..t! You Beat me Craig

Another option might be a Wireless 1. Same features as the active with individual control etc but without the wires.

Peter