in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 01-28-2009 2:09 PM by bumble. 10 replies.
Page 1 of 1 (11 items)
Sort Posts: Previous Next
  • 01-28-2009 9:29 AM

    I need a cabinet for my BeoVision 4 50" HELP

    I have been advised that the B&O cabinets do not support a BeoVision 4 50". I need some sort of cabinet.

     

    Any recommendations as to what make to look for?

    I also remember a new company who built cabinets purposefully for B&O equipment!! what company was that?

     

    Cheers for any help.

  • 01-28-2009 9:34 AM In reply to

    Re: I need a cabinet for my BeoVision 4 50" HELP

    http://www.struerdesign.co.uk/

     

    Did you mean this one?

    -Andreas

     

    BLab5, BLab5000, BLab8000, BV10, BS9000, BS3, Beo5, Beo4, BLink1000, BLink5000, BLink7000, A2, A8, Form2

     

     

     

  • 01-28-2009 10:12 AM In reply to

    Re: I need a cabinet for my BeoVision 4 50" HELP

    Do you mean something like this

     

    http://www.dwr.com/product/furniture/living/media+storage/muro-media-storage-unfinished.do?sortby=ourPicks

     

    something that holds your screen?

     

     

    BS9000, BS2300, BC2, BL2500, BL3, Bl2, BS1, BV8, BC4, A8

  • 01-28-2009 10:48 AM In reply to

    • Robert
    • Top 150 Contributor
    • Joined on 06-13-2007
    • Northern Ireland
    • Posts 362
    • Gold Member

    Re: I need a cabinet for my BeoVision 4 50" HELP

    Spectral make some nice TV stands. Very good build quality, my parents have one.

     

     

    Regards,

    Robert.

     

  • 01-28-2009 11:17 AM In reply to

    • k984942
    • Top 500 Contributor
      Male
    • Joined on 11-10-2008
    • London, UK
    • Posts 194
    • Bronze Member

    Re: I need a cabinet for my BeoVision 4 50" HELP

    I've been looking for a small cabinet that would raise my 28" Avant about a foot higher, yet can withstand the 60kg weight.

    Any suggestions guys?

     

    32" RF VCR Avant, 2 x 28" VCR Avant, DVD1, Beocom 6000, Beo5, A9 Keyring!

     

  • 01-28-2009 11:42 AM In reply to

    • bumble
    • Not Ranked
    • Joined on 05-21-2008
    • USA
    • Posts 21
    • Bronze Member

    Re: I need a cabinet for my BeoVision 4 50" HELP

    Hi Scotty -

     

    In fact, the B&O large cabinet #1218666 (http://www.bang-olufsen.com/cabinets) is designed to support a BV4-50 on table stand.  My brother has his BV4-50 on one; mine holds LPs and a BeoGram.

     

    It's sturdy, strong, and really well-made.  No complaints.

     

    Good luck -

  • 01-28-2009 12:20 PM In reply to

    Re: I need a cabinet for my BeoVision 4 50" HELP

    Looking good folks!!

     

    Any prices for them in the UK?

  • 01-28-2009 12:22 PM In reply to

    Re: I need a cabinet for my BeoVision 4 50" HELP

    The B&O cabinet shows only speaker on it, are you sure it will hold a 50"?

  • 01-28-2009 12:35 PM In reply to

    • Robert
    • Top 150 Contributor
    • Joined on 06-13-2007
    • Northern Ireland
    • Posts 362
    • Gold Member

    Re: I need a cabinet for my BeoVision 4 50" HELP

    http://www.tvandvideodirect.com/section.php?xSec=762

     

    Here is a website in the UK which stocks Spectral stands. I'm not sure of the cost of the B&O cabinet, but I reckon its probably not far off these. My parents bought theirs from a HiFi shop here in NI, and I'm sure if you were to look in whathifi magazine you could find a retailer near yourself. The problem with spectral is that they have very little information on the internet, but a retailer would have a catalogue. There are alot of finishes (coloured doors, different glass etc) and cabinet sizes to choose from.

     

    Hope this is of some help, and if you have any other questions just ask.

     

    Robert.

  • 01-28-2009 12:47 PM In reply to

    • Mico
    • Top 500 Contributor
    • Joined on 05-06-2007
    • Finland
    • Posts 136
    • Founder

    Re: I need a cabinet for my BeoVision 4 50" HELP

    I've stood on top of mine, based on that it will hold.

  • 01-28-2009 2:09 PM In reply to

    • bumble
    • Not Ranked
    • Joined on 05-21-2008
    • USA
    • Posts 21
    • Bronze Member

    Re: I need a cabinet for my BeoVision 4 50" HELP

    No problem.  I, too, have stood on top of my cabinet - I'm about 190 lbs.  Cabinet in USD should run about $2200 with doors.

     

Page 1 of 1 (11 items)