in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » Problems with Beovision 4-37 and Beosystem 2
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 11-29-2008 3:51 AM by jjihonor. 4 replies.
Page 1 of 1 (5 items)
Sort Posts: Previous Next

  • 11-26-2008 7:27 PM

    Problems with Beovision 4-37 and Beosystem 2

    Reply Contact

    Hi there

    I've recently finished building a home theatre system with the above + BS9000, BL8000s, BL4000s as centre, BL3s, BL2.  I got the screen from America so have got a voltage transformer for it. All other items are UK voltage.

    The problem is that it doesn't work.  The IR eye doesn't light, the TV won't go on. No response from the remote.  Does anyone have any idea what is going on? 

    John 

     

  • 11-27-2008 4:57 AM In reply to

    Re: Problems with Beovision 4-37 and Beosystem 2

    Reply Contact
    Which cables have you between the BS2 and the BV4?

    BeoVision10-46MKII,BL3,BL2,BS8,Beo5

  • 11-27-2008 7:46 PM In reply to

    Re: Problems with Beovision 4-37 and Beosystem 2

    Reply Contact
    Hi.  Connected with that cable that has a 9 pin and a 15 pin at each end.

  • 11-27-2008 11:07 PM In reply to

    Re: Problems with Beovision 4-37 and Beosystem 2

    Reply Contact

    You should be able to connect a DVD straight to the screen. I would try that first without going through the BS2, that way you can confirm that the screen itself is working.

     What converter are you using. If it is undersized, it might not power the screen at all. 

    BS9000, BS2300, BC2, BL2500, BL3, Bl2, BS1, BV8, BC4, A8

  • 11-29-2008 3:51 AM In reply to

    Re: Problems with Beovision 4-37 and Beosystem 2

    Reply Contact
    I'll try that. thanks.  Using a 200w transformer.  Screen is approx. 180W.
Page 1 of 1 (5 items)