in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 04-23-2008 2:41 AM by Keith Saunders. 5 replies.
Page 1 of 1 (6 items)
Sort Posts: Previous Next
  • 04-22-2008 3:16 PM

    PCB 24 on Penta II

    Hi guys...

     On the...on the PCB 24 on the penta II....the P114 goes up to the jumper and on to P113-6 audio/video switch..

    Which 2 legs is this jumper supposed to be between....???

    THe displays are not working as of yet....

    thanks !!!

  • 04-22-2008 3:31 PM In reply to

    Re: PCB 24 on Penta II

    Frank,

    Do you mean J2 which is between P113 pin 5 and R26 ?

    P114 does not go to a jumper, but it goes directly to P113 pin 6

    Regards Keith....

  • 04-22-2008 3:38 PM In reply to

    Re: PCB 24 on Penta II

    ahh....just to the right of that on page 2-3...the P114 from R47 up to P113-6...

    I beleive is the one in question...there are 3 legs down...and the tech tells me that there is a jumper between 2 of the legs...

     thanks Keith !!

  • 04-22-2008 3:55 PM In reply to

    Re: PCB 24 on Penta II

    Below is the circuit you are looking at

    Regards Keith....

  • 04-22-2008 4:09 PM In reply to

    Re: PCB 24 on Penta II

    Exactly Keith !!  so is there supposed to be a jumper there on the P114?? cause there is on these speakers..
  • 04-23-2008 2:41 AM In reply to

    Re: PCB 24 on Penta II

    The jumper is intended to be in place, its removed for test purposes only.

    Regards Keith....

Page 1 of 1 (6 items)