in Search
Home Blogs Media Forums Live Forum Archive Forum 2012-2022 Main Web Site
Forums » General Forum » General Forum » motorstand MX5500
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 05-10-2007 6:41 PM by EOB. 7 replies.
Page 1 of 1 (8 items)
Sort Posts: Previous Next

  • 05-03-2007 5:58 PM

    • EOB
    • Top 500 Contributor
    • Joined on 04-18-2007
    • Posts 188
    • Bronze Member

    motorstand MX5500

    Reply Contact

    Somehow it seems that the stand falls into a standstill .....if i push it a little it will continue.....is this due to wear inside the motor and can it be helped. Or might it be of influance that I mounted a MX3500 on it ?  ( maybe not quite in balance as the MX5500 ?)...

     

  • 05-04-2007 8:24 AM In reply to

    Re: motorstand MX5500

    Reply Contact
    Unlikely to be due to weight/balance ... try wiggling the stand wire ...

  • 05-04-2007 10:59 AM In reply to

    • Craig
    • Top 10 Contributor
      Male
    • Joined on 03-29-2007
    • Costa Del St Evenage
    • Posts 4,855
    • Founder

    Re: motorstand MX5500

    Reply Contact

    nobby:
    try wiggling the stand wire

     

    Is that the technical term for it then mate.Laughing

     

    CraigBig Smile

    For millions of years, mankind lived just like the animals. Then something happened which unleashed the power of our imagination. We learned to talk and we learned to listen..

  • 05-04-2007 11:37 AM In reply to

    • Kevin
    • Top 50 Contributor
    • Joined on 02-15-2007
    • Moderator
    • Posts 1,256
    • Founder

    Re: motorstand MX5500

    Reply Contact
    That's experience that is...... won't learn that at collegeWink

  • 05-04-2007 11:57 AM In reply to

    • EOB
    • Top 500 Contributor
    • Joined on 04-18-2007
    • Posts 188
    • Bronze Member

    Re: motorstand MX5500

    Reply Contact
    Tried the wigle part ;)......I took the plug out and i am not sure ....is the green wire suposed to be not conected to a pin ? only 3 wires are conected.......

  • 05-04-2007 2:59 PM In reply to

    • Christian
    • Top 100 Contributor
      Male
    • Joined on 04-16-2007
    • Copenhagen, Denmark
    • Posts 626
    • Bronze Member

    Re: motorstand MX5500

    Reply Contact
    I think all four wires need to be connected for the motor stand to work. It might solve the problem, can anyone confirm??

    Living room: BV7-40 mkIV + V8000, BL5, BL3, BM1 and BS9000. Bedroom: MX3000 and BL4500 on MCL2-AV. Around: PentaIII, CX100 and MCX35 on ML/MCL + MCL2-A, BeoPort and BL4 on ML, BS3300 + M75 as stand alone, BC6000 + BC600 and BT1100, LC1, LC2, Beo4, Beo5 and BL1000, BS2 and A8, EarSet2, Apron, Coffee mugs, Enamel Bagdes, Bath towel, Keyring, Books, Lots of miniature and the Bottle opener. Office: BC2300 + BL2500 and BS3. Summer house: BS Century.

    Addicted? Oh no.... ;)

  • 05-08-2007 11:13 AM In reply to

    • EOB
    • Top 500 Contributor
    • Joined on 04-18-2007
    • Posts 188
    • Bronze Member

    Re: motorstand MX5500

    Reply Contact

    took the din a bit further apart:

    4 pins 3 are conected 1 seems to be never coneted.

    but maybe this might be the cause ; th outer shield of the din has barely to no contact with shield around the cable.........isn`t it suposed to be the earth shield so conected to the din metal outer part ?

  • 05-10-2007 6:41 PM In reply to

    • EOB
    • Top 500 Contributor
    • Joined on 04-18-2007
    • Posts 188
    • Bronze Member

    Re: motorstand MX5500

    Reply Contact

    for referene purposes;

     I have put the fastening inside the din which might be touching the outershield of the cable wire a bit further so it was unlikely that it would touh.....

     the other 3 conections in the din are now a little cramped but hey when tried ,.....it works !

     Of course i would like to know if it is due to the shield part or maybe a wire breah that somehow now is fixed ,....but in the end ...it can be used Cool

    Thx for replies and help

     
Page 1 of 1 (8 items)