ARCHIVED FORUM -- April 2007 to March 2012READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012
Beosystem 7000/6500- Beolab 4000 - Beosound 1 - A8 - Earset 3 - Beo4
TheMajor:Hey guys my left beolabe 4 is going into stand by mode. They are both set to auto. Any ideas?
It could be the remote in the powerlink cable... Try switch the powerlink cables to sort out the problem...
Regards
BL8000 MkII Black
TheMajor:They are PCs.
Try to switch left and right cable to see if it helps then you now if it is the cables or not.. Otherwise it is in the circuit inside the speaker and you must contact your dealer and have a service..
That would be because the MacMini will have a much lower noise output in comparison to the PC (Macs generally have much higher quality sound cards built in).
Weekly top artists: