|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Latest post 10-25-2008 10:18 PM by PhilLondon. 6 replies.
-
10-24-2008 2:05 PM
|
|
-
PhilLondon
  - Joined on 04-16-2007
- London
- Posts 2,545
|
I have one pyramidal base station and 2 handsets. Since the 23rd of September, none of the handsets register missed calls and recent calls. When I press redial, I still see the people I called on the 23rd last month. Same when I press Caller ID. What may have happen? I suppose it is the base as both handsets react in the same way. I can still store numbers... p.
|
|
-
-
Daniel
  - Joined on 04-17-2007
- Svinarp, Sweden
- Posts 1,284
|
When the phones rings, can you see the number calling you?
Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1
|
|
-
-
-
Daniel
- Joined on 04-17-2007
- Svinarp, Sweden
- Posts 1,284
|
OK, then I've got no clue. Sorry!
Beovision LX5500, BeoCord V6000, BeoSound 9000, BeoLab 8000, BeoLab 3500, BeoLab 2000, BeoVox1, BeoCom 6000, Form1, LightControl 1
|
|
-
-
Medogsfat
 
 - Joined on 02-21-2007
- *Moderator* Leeds, Yorkshire
- Posts 4,045
|
A hard reset is always worth a try. Unplug the PSTN base for 10 minutes and see if this makes a difference. I've had a few anomolies with my Beocom 6000 which were solved by doing this. Chris.
The use of metaphors should be avoided like the plague. They're like a red rag to a bull to me.
|
|
-
-
Opman
  - Joined on 12-31-2007
- Cheshire, UK
- Posts 323
|
When you unplug the base from the mains, switch the handsets off as well. Then re-connect the mains first, then switch the handets back on. I find that usually helps the handsets to re-establish connection ot the base. The mark 1 handsets are switched by holding down the "dot" button to the left of the wheel for about 7 seconds until the display says "power off". To switch the handset back on, just press the dot button again. Opman
|
|
-
-
PhilLondon
- Joined on 04-16-2007
- London
- Posts 2,545
|
It has done the trick! Thanks!
|
|
Page 1 of 1 (7 items)
|
|
|