Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags »
Tonearms »
service (
RSS)
-
Hello all, after a a period of some months, I tried to play some records on my Beogram 4000 with no success. The tone arm does not move across! I removed the aluminium plates and I saw that the motor doesn't turn. I measured the voltsge on the cable motors and is 0 Volts? Do you have any idea about...
-
Next, I proceeded to clean the open switch in the near-right quadrant... Same process as above. Clean the open side first: Flipping this switch to the opposite position is accomplished by lightly pushing the white lever as shown - again, using very light fingertip pressure. Next rotate the aluminum platter...
-
Using acetone (the wife's nail polish remover) and a fine-tip paint brush, I began cleaning the switch in the far-left quadrant of the turntable: The switch: Cleaning first open side contacts with acetone and brush: Flipping switch to opposite position accomplished by pushing as shown with very light...
Page 1 of 1 (3 items)