@ Stefan and beojeff: Thank you for the good information. Unfortunately, I don’t have access to BV7-40 MKIII, BS3 BeoLink Active or Passive with firmware version 1.6. But, some minutes ago I was at my local dealer to ask for a firmware update of an old BeoLink Passive which has version 1.4. I hope this could be done. The technician will be back

„LINK, LIGHT“ does not pass through too. I hope to get a ML Gateway compatibility list from B&O. Maybe the BS3000 needs a firmware update. Depending on the weekend weather I can check the behaviour with another audio and video source. Andy

Attached is a schematic from a BV5. Nearly the same solution is used in BeoLink converter. The logic analyzer probe is connected to Pin 1 of the ML-ASIC, so it is possible to get the unfiltered packets from the MasterLink bus. After work I try “LINK, LIGHT”. Andy

[quote user="PhilLondon"] If you do not have a Beo5, you can use LIGHT codes from the Beo4, they also pass through. [/quote] As a first step that would be enough. Unfortunately the logic analyzer does not capture anything when pressing the LIGHT button followed by a number or something else on the Beo4. So it seems that these commands do not

The ML Gatways costs 2010 € in Germany and there is not a lot of documentation about the functionality on the B&O website. Before spending this amount of money for a “simple” gateway I would like to get more information about it. Attached is screen shot from a simple USB logic analyser. The data was taken from a 1611 converter when

Hello, Thinking about connecting ML to a home automation system (SPC = stored program control) I stumbled over the B&O MasterLink Gateway, which is indeed a simple solution. But before investing money for this I would like to get more information about the MasterLink bus itself. The only thing I knew at the moment is that it uses an asynchronous

Hallo Barry, how is it possible to reserve B&O equipment online? Or did you book a presentation at your local dealer? Kind regards, Andy

Hallo Alsfeld, Der BeoLink Konverter lässt sich auch parallel zu einem bestehenden Audio-Master einsetzen. Allerdings weis ich nicht, wie es sich mit einem Video Master verhält. Bei mir reagiert der Konverter auf "A-V.AUX". Falls der Video Master beim aktivieren von "A-V.AUX" sich angesprochen fühlt, funktioniert das

Hallo Bene, eine Möglichkeit ist die Verwendung eines BeoLink Konverters 1611. Das Gerät kann als einfache Audioquelle in ein bestehendes MasterLink Netzwerk eingebunden werden. Diese Option nutze ich für den Anschluss eines PCs. Dem Menü der Beo4 lässt sich "A-V.AUX" hinzufügen, um damit den Konverter zu aktivieren

Hallo, mein Händler wollte oder konnte mir den Fehler leider auch nicht erläutern. Mittlerweile wurde das CD-Laufwerk ersetzt und wir können wieder genussvoll CD hören. Viele Grüße, Andreas