|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
I tried to repair them as well, months ago, but not (yet) successful. Perhaps they have problems with the controller. To open them, you have to destroy somehow the housing. The shiny upper part is glued to the body. But you may be lucky to crack it open. Try with a carpet knife. Start left and right of the inscription. At the bottom there is one screw
-
There is a lithium cell inside. Maybe it's empty. But I can't tell if this is the reason.
-
Hi Thomas, of course, this player has a pitch control as well. It is placed in the border of the keyboard, the glossy part. Usually it is iluminated, but in your case, the lamp may be blown. Is is a red wheel. Have fun searching. Chris
-
Hallo, [quote user="Onduliereisen"]Gibt es bis auf den Stecker einen Unterschied zwischen MCL und ML?[/quote] Bei MCL sind es passive Lautsprecheranschlüsse, die verteilt werden und bei ML ist es ein Signal, was dann erst noch verstärkt werden muss. Daher muss man bei ML Aktivboxen anschließen, hat aber auch den Vorteil, dass
-
Das mit dem Umschalten bei Signal bzw. kein Signal kann eigentlich nicht stimmen, das wäre ja lästig bei Pausen zwischen den Stücken. Ich glaube, es ist ein Schalter in der Buchse, der das Signal umschaltet, sobald ein Stecker in AUX eingestöpselt wird. Die Bedienungsanleitung, die man über Beoworld laden kann, gibt aber nichts
-
Hallo Tom, zu 1: mit einem Adapter Kopfhörerstecker auf 5-pol DIN Stecker, den man dann an AUX bzw. Tape2 anschließt (je nachdem, wie der Eingang gerade heisst, vom Pegel sind sie gleich), oder mit dem Dock von Apple und dann die Cinch Stecker entsprechend verwenden. (ich weiss nicht, ob das Gerät auch Cinch Eingänge hat, sonst
-
Hi Loris, that's weired! May be, this fails more often. I had a totally broken bearing at a BG of a friend of mine and I fixed it with superglue. Works very good, because it creeps between the metal parts but let it harden for several houres (not seconds). Chris
-
Hi Loris, the sub-platter has three points where the upper platter sits on. You can place some felt or cardboard on one of these, which is the lowest. I think, there will be no need for lubricating.
-
Die Mechanik ist bestimmt ok. Die Lichtschranke hatte ich auch ganz zuerst in Verdacht, da ich noch nicht wusste, dass der Player sofort auf St-By geht, wenn keine CD drin ist. Die Optik ist sauber, aber vielleicht stimmt was mit der Elektronik drumrum nicht. Das Ganze ist allerdings umständlich im Service, besonders weil die Hauptplatinen nicht
-
I have the same problem. And I have the idea of using the hinge of a compass. Most of them have these gear wheels. But the one I have has too big teeth
|
|
|