Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
I have a lintronic box in the living room that controlls my iPod, satellite and DVD player - I then have one sensor in the kicthen and one in the living room, it seems that the maximum sensors you can have it two, so in order to have the same control in my bedroom I would have to buy another lintronic box, so wondered if and IR extender would send the
-
Does anyone know if by changing the IR Sender and Receiver in a standard IR extender for B&O ones, if it could then be used with Beo4? I know that the frequency range is much higher so it won't work with the standard ones but just wondered if I used B&O IR leds if it would work.
-
IMHO it would be well worth chipping as it displays everything thats on the iPod Screen and gives a display on your TV of what's playing - it should be possible i would have thought once it's chipped to plug it into one of the Scart sockets on a TV and have it configured as a Video Device - thus sound and picture could be routed through to link
-
I spent a while looking at these and ended up getting the Onkyo dock as it has a video output to your TV and allows you to see and select albums, playlists etc. on the TV Screen making navigation much easier - they're about £70 - but doesn't work with the B&O Remote - so bought a Lintronic Converter which converts the commands and
-
Thanks for the replies, I'm going to look at installing a proper outside aerial - seems the cheapest option. Thanks again Andrew
-
Hi All I was wondering if it was possible to upgrade the Tuner part in my BS3000 to Digital Radio rather than analogue? and if so how much it would cost? regards Andrew
-
Hi - the lcd panel on my screen was accidently broken when someone stood on it! - I've bought a replacement screen to fit but don't know how to get into the Beo4 to replace it - have removed the battery cover and three obvious screws but can't see what else there is to do - Has anyone else done this or can offer any tips?
-
Hi - I think you're right - can now use the radio and cd using AV, I'll try hooking the VCR upto the MX tonight and see if that works too - looks like it is the software chip - I'll ask my dealer if it's possible to still get an upgrade chip or wonder if anyone else has one from a broken set? Do you think it's possible to swap the
-
Hello again I must be missing something here - tried to find a manual for the MX3500 or setup for the other bits on the site, but they're not there. I've managed to get control of the stereo via the mx3500 by setting it to Option 2 The LX and BS are set to option 1 I can get sound from the BS through the LS by doing AV Radio AV but no sound
-
Just tried doing av vtape av and the sound doesn't come through the stereo either - wonder if it is the software - the MX3500 is 2.25 - would swapping them over work? so that the LX is in the bedroom and MX in the living room? if it did could the software chips be swapped?