|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi I sometimes use my Bl1000 to control my Bv7, it works almost perfekt, but is possible to activate PC. Søren
-
There are no powerlink sockets on beomaster 5500, but you can connect them to the line output, the only problem is that if you play at low volume the speakers will turn off sometimes. Søren
-
It is correct you can use Beo4, but I think the funtions are to limited compared to LC1 and LC2, it is only possible to use Light RED, YELLOW BLUE and GREEN. that means 4 dimmers total. Soren
-
Jeg vil mene at du kan bruge en 1611 da den er en opdateret version af 1610, jeg brugte selv en lånt 1610 i en periode til at linke mit Beosystem 7000 med mit Beovision 1. Men da ejeren igen skulle bruge den købte jeg en 1611 og har ikke bemærket nogen funktionsmæssige forskelle. Søren
-
Besides RDS, Beomaster 7000 has 24 preset stations, Beomaster 6500 has 20. Søren
-
What is the serialnumber on the black MCP, the change from BS6500 to BS7000 was betwhen 091***** and 095***** Att. LEE there is a BS7000 with a black MCP on www.dba.dk http://www.dba.dk/asp/vispopup/billedBrowser.asp?BilledType=1&BilledNr=1&Annonceid=54548515&Rubrikid=21700 Søren
-
It is not available anymore, but for some reason the one for Beogram 6500 still is, or it was 2 years ago. Søren
-
Like you can se here on this copypast from http://www.hardwarebook.info/DIN_Audio The output from the taperecorder pin 3 & 5 goes to the input pin 3 & 5 on the amplifier. and when recording output from the amplifier pin 1 & 4 goes to the input pin 1 & 4 on the taperecorder. But you have 2 amplifiers that means that the output from the
-
I think you would need a speciel "crossover cabel" with the following connections BM7000 BS9000 Pin 2----------------------Pin 2 Pin 1----------------------Pin 3 Pin 4----------------------Pin 5 Pin 3----------------------Pin 1 Pin 5----------------------Pin 4 Søren
-
Try to connect your Beocord 7000 to the tape 2 socket, and then make a recording from radio or Cd, if that works there is audio out from tape 2. Søren
|
|
|