|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Hi Sören, As there is about 4.2mA (instead of the nominal 300uA) through R548 and 549 according to the voltages given I'd suspect TR52; this is the only DC path that could draw this current through R551/R553 (unless R550 120k is short or low...). What about the 0.77V on the two diodes D563/D564 resp. base of TR53? On the other hand, the cuba
-
Just remove the 4 screws on the 4 corners of the actual woofer speaker at the clamps that hold it. Then remove the clamps & pull out the woofer from the front - it is not glued to the wood. But not sure, I have some Vox'es 2600's from the same area and they are mounted that way. The crossovers will be accessable through the woofer's
-
At least the second one is definitely not original. Never seen one with that tweeter cone in the middle. And if I see nothing around that big paper cone yes, that's the foam that's missing. Not sure if the original speaker had foam surrounds - I suspect they were rubber in the 70es. The first one could be original & rubber - just check it
-
[quote user="Leslie"]Anyone who I can send the paper version (copie) free of charge or I will throw it in the bin.[/quote] Strange that noone has applied yet; So I would take care of the paper copy Gunther
-
[quote user="seahawk"]I thought it was peel & stick[/quote] Is IS peel & stick; at least the original ones I ordered beginning of his year. It is a bit complicated though as if you do it wrong you rip the glue off as well: I had a knife inserted under the "carrier paper" to seperate it. Yes they are still available: #3917087
-
[quote user="Rich"]I'll try changing the black lead and shielding to pin 2 and see if that works.[/quote] Sounds better. On a DIN plug pin 2 ("middle" pin) is always GND. Normally 1&4 is in (1 left, 4 right). That's what you found as well. You can touch pin4 or pin1 on your BC with your finger without touching GND as
-
Yes, the first 901's had different power transistors and 2 speaker outputs only. The later ones had 4. Don't know the serial# on change. Gunther
-
2 x 2.5W Output, probably PMPO only? Is this an weakly powered earphone amplifier? That's a laugh... Even an 40 years old BM1000 can top this (and would then be a better dock...) You could also read the waste logo as "don't buy his trash"
-
[quote user="Søren Mexico"]Boys you are young and beautiful ( I'm only beautiful)[/quote] And I am only "and" [quote user="Søren Mexico"] And EVAN I bet, my BM 4000 will be up and running before yours. [/quote] Hej Sören, Eve's BM4000 IS up and running And yours has way to go....... Gunther
-
Yes, we like photos Gunther
|
|
|