|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
Can a video/Audio master view & control sources connected to a slave I.e If I have my sat connected to my avant (slave) in one room can my Beosystem 2 configured as a master control the sat.
-
Alex: Bingo: moxxey: Bingo: Now they think they found out the wheel again with a camera on the new Beovision4 . I saw a $7,500 dollar price mentioned for the 50 inch new Beovison 4 without speaker but if this includes the Beosystem 3 which was always part of the Beovision 4, there must be a dramaticly price-reduction on its'w way. http://www.i4u
-
I have a Beosystem 2 connected to Panasonic PW4 which is a older model but works fine, If I was you i would ditch the LCD and get a plasma to go with the beosystem 2, You could pick up a Panasonic PW5/6/7 & 8 series which will work perfectly with the BS2 & if you want Hi-Def then either the 8 or nine series are hi-def capable with a HDMI/DVI
-
The panasonic does have line level outputs which can be used for a stereo or something, with the correct adaptor to Din plugs so you would need to go through a Beosound or beosystem in order to control the level to the Beolabs as they do not have a preamp inside them . Simon
-
Thanks Peter Checked option setting's again & it cured the problem, I must of accidently hit 1 instead of 2 when playing around with the system ( long story about the Beosysetm 2 etc). thanks again guys Simon
-
Hi Kallasr The sky box is set up as Sat/STB on the avant but when press sat in the room with the BM7000 I cannot hear the sat.
-
Hi I have a BM7000 connected by converter box 1611 to ML connected to my avant, I can play CD, Radio etc on the avant no problems but I cannot hear the Sky that is connected to the Avant on the BM7000 in the other room. Any thoughts Regards Simon PS just to add I have got the sky box connected by scart to the avant
-
koning: Is the problem solved? Yes! I have been trying to sort this out for about a week and half trying different ways as suggested by different people, in the end I got fed up & just left unit with the power cable in and the power button pressed down as already suggested but had not worked & I got up this morning & it was in standby with
-
Could I use this http://www.beoworld.org/prod_details.asp?pid=978 or even this http://www.beoworld.org/prod_details.asp?pid=982 with a IR sensor or will it not work.
-
As title really, would like to to integrate our Panasonic LT2 15" widescreen LCD which we use in our bedroom into our link system. As you may know already I have asked several questions in previous threads about using a remote IR sensor with BM7000's that I plan to use plan to place in a cabinet, one of these BM7000's is for the bedroom
|
|
|