|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
thanks menahem! i´m definatly no technician, just trial and error... very much trial and unfortunatly also much error... jens
-
hallo hansjöeg! es ist schwierig eine normale b&o werkstatt zu finden, die noch lust haben auf komponenten ebene zu reparieren und nicht nur ganze module auszutauschen.... das mit den spindelmotor reinigen und schmieren hilft sehr oft, aber es gibt natürlich auch defekte laser, dann kann man nicht mehr soviel retten. um an den spindelmotor
-
you´re welcome! for cleaning and lubeing you´ll have to disassemble the motor. after losening the small platter, where cd normally is clamped on, you can dismantle the motor from the chassis and then you´ll see, that the axis of the spindlemotor is fixed in its bearing by a little brassring. this brassring is really tight on the axis;
-
hi menahem! the laser and the motor are seperate. the laser is really robust in a metal casing and isn´t the first part, i would expect to fail. but the spindle motor is likley to need some good cleaning and relubbing, at least that was the case with the two cd50 i have. after that the beogram problems with reading the cd were solved. so good
-
hallo speedmaster! da hast du natürlich, daran hab ich jetzt garnicht gedacht, dass du ja natürlich am BM2400 phonoeingang doppelte riaa-entzerrung hast... eindeutig einmal zuviel . ja, die din-kabel sind schon mal gern ein wenig zickig, was brummen anbelangt. schöne grüße, jens
-
hallo, also das mit dem brummen ist wahrscheinlich ein erdungsproblem, dass, da es mit aufsetzen der nadel verschwindet, evt. mit dem relais zusammenhängen könnte, das den ton von der nadel durchschaltet, sobald diese auf der platte aufgestzt hat. vielleicht hier mal nachgucken und kontakte reinigen... der schlechte klang kann auch an dem
-
hallo dario! der 4002 hat normalerweise keinen eingebauten vorverstärker. das schwestermodell beogram 6000 hatte einen installiert, zusammen mit dem quadro-decoder auf einer kleinen platine unter dem tastenfeld. rein theoretisch könnte man diese auch im 4002 einbauen, es ist aber eher unmöglich die platine aufzutreiben. was die nadel
-
hello die bogener! two days ago my mx 4000 broke down and as i won´t get the spare parts til tomorrow (following your hints in the mx4000 thread), i started with my old mx3500, which broke down two years ago and wasn´t repaired, but replaced by the mx4000. my supplier had all the parts in stock, so i gave the 3500 a go. your workshop is
-
hallo an alle! vor zwei tagen hat sich mein mx 4000 zum ersten mal selber ausgeschaltet, nach erneutem einschalten lief er dann aber ganz normal... dann hat er sich immer, wenn man ihn zum ersten mal am tag eingeschaltet hat nach einigen sekunden wieder ausgeschaltet, nach neuem einschalten lief er aber stundenlang ohn probleme. wenn ich mit der fb
-
hi ablaumeise! the poweramp has a protection circuit, which switches the beomaster back to stand by after some seconds, if there´s a fault in the power amp. it could well be, that that´s, what happens with your beomaster. did you already check the four trimmerpots there? they´re faulty quite often and as the parts are not expensive
|
|
|