Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Search
-
HI i just recently purchased a pair of beovox 3800 to go with my beomaster 3000 and they just dont quite sound right, so the first thing i did was replace the caps in both speakers which improved them alot but after that they still didn't sound right as they were a lot bassier than i would have thought. i looked into each individual speaker and
-
Hi im just trying to get all my old B&O hi fis up and running again and i just have a quick question about the beocenter 2800. What value are the fuses that go into the voltage section dial on the inside of the hifi ??? thanks Rich
-
thanks martin. when you do pls advise how much plus postage cheers RichC
-
hi folks, Has anyone got a transformer for one of these Pls? I'm in Essex cheers RichC
-
guess I'm needing a transformer ... I prized apart the two halves of the outer shell with the hope of having all revealed, but not a lot can be seen inside other than a white donut with a few black streaks under the plastic wrapping
-
many thanks , as always Martin. I disconnected everything downstream from transformer I think ... i.e 2 black wires disappear into voltage dial (rectifier?) and come out and feed into 1.6A fuses before entering(transformer?) via numerous waxed red & green cloth covered wires. More wires come out from this transformer & supply tiny PCB.... I
-
where to start? we've had a quick look , replaced fuse (which was actually 1A ) above voltage dial with a proper rated 1.6A but that blew straight away what's the commonest cause for fuses blowing in these pls? would it be the big heavy metal thing in the middle perchance? Rich
-
-
I expect there's no old stock of these anywhere? has anyone found a suitable replacement pls? cheers RichC (school holidays means all the bits of old B&O junk are having some attention lavished on them .... as I type, my son is making a replacement drive wheel for caterpillar track with an old cotton reel and a piece of dowel . maybe there's
-
Well it's school holidays now & the devil makes work for idle hands ... I went into our studio to find something B&O-ish open on the operating table ... what's that? I ask . It's an old 2200 which keeps blowing 1.6amp fuses (the ones above the voltage selecter dial) . where to start looking for obvious culprits? sometimes one blows